What is N690 steel made of and how was it developed?
N690 is a high-carbon, high-chromium stainless steel from Böhler-Uddeholm that uses cobalt and molybdenum to boost hardness, edge retention, and corrosion resistance while staying tough enough for hard-use and custom knives.
Böhler first introduced N690 in the late 1990s as an evolution of its surgical-grade 440B alloy. The goal was simple: create a stainless that would harden past 60 HRC, hold an edge longer than 440C, yet grind and polish easily enough for production tooling. Chemically, N690 hovers around 1.07 % carbon, 17 % chromium, 1.1 % molybdenum, 1.5 % cobalt, 0.4 % manganese, and 0.40 % silicon. The cobalt acts as a secondary hardening element, tightening the martensitic lattice so carbides distribute more uniformly. Molybdenum and chromium work together to ward off pitting in salty environments, making N690 popular with European dive-knife companies like Extrema Ratio and LionSteel. Over the past two decades the formula has remained stable, which explains why data sheets from 2003 and 2025 read almost identically. This continuity has let heat-treaters refine time–temperature curves until they can squeeze every last point of hardness without inducing brittleness.

How is N690 steel produced today?
Commercial N690 is melted in an electric arc furnace, refined with Argon–Oxygen Decarburization (AOD), and often given an Electroslag Remelting (ESR) pass to improve cleanliness and toughness.
Modern N690 starts as scrap and alloying elements charged into a 100-ton EAF. After initial melting, the ladle transfers the heat to an AOD vessel where sulfur and excess carbon are blown out. Next comes ESR: a slow remelt through a conductive slag bath that filters out oxides and sulfides, resulting in a billet with fewer inclusions and a reduction in anisotropy. The ingot gets hot-forged and rolled into bar stock ranging from 3 mm to 12 mm thick. Some mills add a vacuum heat-treatment anneal to give knife makers a uniform 240 HB condition that machines easily yet resists warping in transit.


