Knowledge

How to use h-beam in winter

Jan 17, 2024 Leave a message

How to use h-beam in winter


H-beam is widely used, such as all kinds of civil and industrial building structures; all kinds of large-span industrial plants and modern high-rise buildings, especially plants in areas with frequent seismic activities and high-temperature working conditions; large bridges requiring large load-bearing capacity, good stability of the cross-section, and large spans; heavy equipment; highways; skeletons of ships; landmine support; foundation treatment and dam projects; and all kinds of machine parts.


1. When cutting and welding H-beam products, please designate the operator who holds the certificate of construction steel welder to operate in accordance with the relevant norms.

 

China H column steel Distributors--GNEE Group


2. When cutting or welding normally, the working part should be preheated and de-stressed (preheating temperature is greater than or equal to 200℃), and the preheating range covers the rounded corner of 100mm. according to the order of cutting the web first, and then cutting the flange later (the principle of thinning first, and then thickening later), and at the same time, the cutting corners should be processed with rounded transition, and the rounded radius is not less than 25mm. immediately after the cutting, the cutting part should be lightly tapped with welding planer knife in order to release the stresses. After cutting, immediately tap the cut part with welding planer to release the stress.


3. When the ambient temperature of the section steel cutting is less than or equal to 5℃, please drill a small hole of 20-30mm at the joint of web and flange and the beginning of cutting, and carry out the normal cutting operation according to the steps shown in the attached figure (the cutting order is first 1 and then 2).


4. When cutting and welding steel sections, the operation should be carried out in strict accordance with the National Code of Practice for Building Steel Structures.

 

If you have more needs and questions about steel, please contact us!

 

China h type steel beam Distributors--GNEE Group

 

GNEE Group receives visiting customers

 

China Structural Steel Beams Distributors--GNEE Group

 

GNEE Group office environment

Send Inquiry