Knowledge

How thick is S690 high strength structural steel sheet?

Sep 29, 2025 Leave a message

Products Description

 

S690 Grade high-strength structural steel Sections are effectively used in construction, with good welding performance and bending performance. Structural designers often choose this high-performance, high-tensile strength multi-functional product to reduce structural weight.

 

S690

 

Characteristics of S690Q-brand steel

 

S690Q is a hot-rolled hardened structural steel that has undergone subsequent tempering treatment and conforms to the EN 10025-6, DSTU EN 10025-6 standard.

 

Standard: Hot-rolled product made from structural steel. EN 10025-6: Technical delivery conditions for high-tensile structural steel post-tempering and quenching.

 

Classification: High-grade structural steel.

 

Product: Fine-grain steel post-quenching and tempering.

 

Chemical composition of S690Q steel according EN 10025-6, %

 

С

Si

Mn

P

S

N

B

Cr

Cu

Mo

Nb

Ni

Ti

V

Zr

0,20

0,80

1,70

0,025

0,015

0,015

0,005

1,50

0,50

0,70

0,06

2,0

0,05

0,12

0,15

 

Mechanical properties of S690Q steel

 

Nominal gauge, mm

Minimum yield strength, ReH (MPa)

Ultimate tensile strength, Rm (MPa)

Minimum elongation ratio σ, %

Brinell hardness number, HB (MPa)

> 3 ≤ 50

690

770-940

14

228-278

> 50 ≤ 100

650

760-930

14

225-276

> 100 ≤ 150

630

710-900

14

210-266

 

Analogues to S690Q steel

 

Germany (DIN)

StE690V

France (AFNOR)

E690T

 

Application

S690Q steel is a high-strength, quenched and tempered structural steel that is specifically designed for use in applications subjected to extremely high loads and demanding conditions.

 

It is widely utilized in the manufacturing of mining and heavy-construction equipment, where superior strength and wear resistance are critical for performance and durability. In addition, S690Q is commonly applied in crane equipment to ensure reliable lifting capacity and structural safety.

 

This steel grade also plays an important role in offshore drilling platforms, providing excellent toughness and resistance to harsh marine environments. Its combination of strength and low-temperature performance makes it suitable for supporting structures of wind turbines, where stability and long service life are essential.

 

Furthermore, S690Q steel is frequently used in bridges, trestles, and other load-bearing infrastructures that require both lightweight construction and exceptional durability.

 

S690Q

 

Welding

S690Q steel is suitable for welding without the need for preheating or subsequent heat treatment. It has good weldability; however, its performance during and after welding depends not only on the material itself, but also on the plate thickness (12–60 mm), geometry, and operating conditions. The requirements for arc welding must comply with EN 1011-2.

 

Recommended welding parameters for S690Q steel:

 

  • Heat input range: 1.5 – 2.5 kJ/mm
  • Maximum diffusible hydrogen content: ≤ 5 ml/100 g weld metal (use low-hydrogen electrodes or shielding gas)
  • Typical welding methods: MAG, TIG, SMAW, SAW
  • Preheating temperature (for thickness > 40 mm, if required): 50 – 100 °C
  • Interpass temperature: ≤ 150 °C

 

Risk of Cold Cracking

 

As plate thickness and strength increase, cold-cracking may occur due to:

High diffusible hydrogen content in the weld metal (risk significantly increases above 5 ml/100 g);

High tensile stress concentrations at the weld seam (particularly in thick plates and complex structures);

Brittle structure in the heat-affected zone (HAZ): if cooling is too fast, impact toughness may drop to around 30 J at –40 °C.

Send Inquiry