
S235J2 is a non-alloy structural steel grade with a minimum yield strength of 235 MPa, designed for use in cold environments. It is impact-tested at -20°C to ensure a minimum toughness of 27 Joules, making it suitable for lightweight structures, supports, and frames in regions with freezing temperatures, such as outdoor walkways or light industrial buildings.
S355J2 is a higher-strength, often micro-alloyed structural steel with a minimum yield strength of 355 MPa. It also guarantees impact toughness at -20°C (27 Joules), but its enhanced strength allows for thinner, lighter sections in demanding applications like bridges, heavy machinery, and offshore structures exposed to cold climates, improving material efficiency and load capacity.
S235J2 and S355J2 are both structural steels with guaranteed impact toughness at -20°C, but they differ primarily in strength, composition, and typical applications.
Here is a direct comparison:
| Property | S235J2 | S355J2 |
|---|---|---|
| Yield Strength (ReH) | Minimum 235 MPa (thickness ≤ 16 mm) | Minimum 355 MPa (thickness ≤ 16 mm) |
| Tensile Strength (Rm) | 360 – 510 MPa | 470 – 630 MPa |
| Impact Toughness | 27 J at -20°C (Charpy V-notch) | 27 J at -20°C (Charpy V-notch) |
| Chemical Composition | Lower carbon & manganese content; standard non-alloy steel. | Higher manganese, often micro-alloyed (e.g., with Nb, V) for strength. |
| Density | ~7.85 g/cm³ | ~7.85 g/cm³ |
| Weldability | Very good | Good, but may require more care (preheat/control) due to higher carbon equivalent. |
| Typical Applications | Light/medium structures in cold climates: walkways, light supports, frames. | Heavier structures in cold climates: bridges, offshore platforms, cranes, high-stress components. |
| Cost & Weight Efficiency | Lower strength, often more economical for light loads. | Higher strength allows thinner/lighter sections for the same load, improving material efficiency. |
Key Takeaway:
Choose S235J2 for moderate stress applications where cost is a priority and thickness is not limited.
Choose S355J2 for higher stress or weight-sensitive designs in cold environments, where its superior strength can reduce section size and weight.
Both guarantee the same low-temperature toughness (-20°C), making them suitable for cold-region structures, but S355J2 offers a significant strength advantage at a higher material cost.
1. What is S235J2 steel?
S235J2 is a non-alloy structural steel grade per EN 10025-2, with a minimum yield strength of 235 MPa and guaranteed impact toughness at -20°C.
2. What does the 'J2' in S235J2 mean?
The 'J2' indicates Charpy V-notch impact testing at -20°C, with a minimum absorbed energy of 27 Joules, ensuring toughness in cold conditions.
3. What is the difference between S235JR and S235J2?
The key difference is the impact test temperature: S235JR is tested at +20°C, while S235J2 is tested at -20°C, making J2 suitable for colder environments.
4. What are the typical applications of S235J2?
It is used in structures exposed to low temperatures, such as outdoor bridges, storage tanks, offshore platforms, and industrial equipment in cold climates.
5. What is the chemical composition of S235J2?
It typically contains max 0.17% C, 1.40% Mn, 0.035% P, 0.035% S, and is killed/fine-grain treated for improved toughness.
6. Is S235J2 weldable?
Yes, S235J2 has good weldability using common methods, but preheating or controlled procedures may be required for thick sections or very cold ambient conditions.
7. What is the yield strength of S235J2?
The minimum yield strength is 235 MPa for thicknesses ≤ 16 mm, decreasing slightly for thicker sections as per EN 10025-2.
8. Is S235J2 equivalent to ASTM A36?
No, while strength is similar, S235J2 includes mandatory low-temperature impact requirements, unlike standard A36, making it a closer match to grades like ASTM A709 Gr. 36.
9. How does S235J2 compare to S355J2?
S355J2 has a higher minimum yield strength (355 MPa) but similar impact toughness at -20°C, making it stronger for cold-weather applications.
10. Is S235J2 corrosion resistant?
No, it is not corrosion-resistant and requires protective coatings (e.g., painting, galvanizing) for outdoor or corrosive environments.
Full specification and details are available on request. The above information is provided for guidance purposes only. For specific design requirements please contact our technical sales staff.


