Knowledge

H beam for construction building Q235 SS400

May 30, 2025 Leave a message

H beam for construction building Q235 SS400

 

What is Q235 Steel?

 

Q235 steel is a kind of carbon structural steel. "Q" stands for yield strength, and "235" is the yield strength value, in MPa. It is divided into four grades: A, B, C, and D. The chemical composition and mechanical properties of each grade are slightly different.

 

Q235 steel has both high strength and good plasticity and toughness, and good weldability, which can better meet the steel requirements of general steel structures and reinforced concrete structures.

 

Among them, Q235-A grade steel is generally only suitable for structures subjected to static loads; Q235-C and Q235-D grade steels can be used for important welded structures; Q235-D grade steel has strong resistance to impact and vibration loads and is suitable for use at lower temperatures.

 

What is SS400 Steel beam?

 

SS400 material is a superior structural steel with an excellent strength-to-weight ratio and high corrosion resistance, making it a key component in a variety of engineering and construction projects.

 

IS G3101 SS400 Equivalent Material:

TAIWAN - CNS CHINA - GB JAPAN - JIS USA - ASTM GERMANY - DIN
SS400 Q235A, Q235B, Q235C, Q235D SS400 A570 Gr.30, A570 Gr.45, A 36/A283M Gr.D St37-2, Ust37-2, RSt37-2

 

JIS G3101 SS400 Chemical Composition:

Grade Chemical Composition, % by weight
C. max Si. max Manganese P. max S. max
SS400 - - - 0.050 0.050

 

JIS G3101 SS400 Mechanical Property:

Grade

Yield Strength min.
(Mpa)

Tensile Strength
MPa

Elongation min.
%

Impact Resistance min.[J]

ThicknessThickness ≥16mmThickness <5mmThickness 5-16mmThickness ≥16mm        
SS400 245 235 400-510 21 17 21  

 

What is the difference between Q235 and SS400?


SS400 material is basically equivalent to Q235 material (equivalent to Q235A) in China. But there are differences in specific indicators. Q235 requires the addition of elements such as C, Si, Mn, S, and P, while SS400 only requires the S and P content to be less than 0.050MPa. The yield point of Q235 is greater than 235MPa, while the yield point of SS400 is 245MPa.

 

h section steel beams

 

Advantages of application in construction

 

Advantages of Q235 H-beam


Cost advantage: The price is usually 10-15% lower than SS400, suitable for budget-sensitive projects.
Welding performance: Low carbon equivalent and excellent welding performance.
Specification adaptation: Fully meets the requirements of Chinese building regulations.
Actual case: A commercial complex project in Shanghai uses Q235B H-beam as the main frame. Through optimized design, it saves about 12% of material costs while meeting strength requirements.

 

Advantages of SS400 H-beam steel


Quality stability: Stricter production process control and small performance fluctuations.
Surface quality: More suitable for exposed structures, reducing post-processing costs.
International recognition: Convenient to participate in international engineering projects.
Dimensional accuracy: Usually higher than Q235 products.
Actual case: A high-rise building in Tokyo uses SS400 H-beam. Its precise dimensional tolerance increases installation efficiency by 15% and shortens construction period.

 

Differences in construction engineering applications


Seismic performance: Q235 can fully meet the requirements of China's seismic code through reasonable seismic design, while SS400 has accumulated more data support in Japan's seismic practice.

 

Anti-corrosion treatment differences: A comparative test of a cross-sea bridge project showed that the coating adhesion of SS400 was slightly better than that of Q235 under the same anti-corrosion conditions, but the difference was within the allowable range of the project.

 

Fatigue performance: Under cyclic loads, the fatigue life of the two materials is comparable, but the discreteness of SS400 is smaller.

 

h beam steel structure

 

GNEE is an H-beam supplier with 18 years of production experience. The h type beam we provide is strictly produced in accordance with the standards, has passed the quality certification, can provide quality certificates, and accept third-party testing. We are always ready to help you with all your structural h beam needs.

 

We have SS400,SS490,SS540,Q235B,S235JR,Q345B, S355JR, A36,S355JR,S355J2,S355J0,S355NL,S355ML,A572GR50,A992,S275JR and other materials in stock. At the same time, GNEE supports multi-specification and multi-brand H-beam customization. If you have customized needs for profile steel, angle steel, and channel steel, please contact us!

 

h shaped beam

h shaped beam

 

FAQ

Q: What are the uses of H-beam in construction?

A: Household construction: Supports walls, ceilings, and roofs.
Bridges: Carries heavy loads for safe transportation.
Factories and warehouses: Reinforces large industrial structures.

Q: What steel grade is used for H-beam?

A: There are eight ASTM standards for H-beam pile beams and wide flange steel beams, including A36, A572-50 grade, A588, A690, A709, A913-50 grade, A913-65 grade, and A992. ASTM A36 is mainly for carbon structural steel.

Q: Which steel is widely used in construction?

A: The most commonly used steel grades in construction projects are A36 and A572. A36 is a carbon steel grade widely used for general construction purposes. A572 is a high-strength, low-alloy steel commonly used in structural applications such as bridges and buildings.

Send Inquiry