What Is RQTSi5
RQTSi5 is a heat-resistant ductile iron grade specified in GB/T 9437, characterized by a high silicon content of about 5 percent. The high silicon stabilizes the ferritic matrix and raises the oxidation resistance temperature, giving the material service capability at 650 to 900 degrees C in oxidizing atmospheres. The designation follows the Chinese system: RQT indicates heat-resistant ductile iron and Si5 indicates the nominal silicon content.
Chemical Composition
Typical composition ranges are silicon 4.5 to 5.5 percent, carbon 2.4 to 3.2 percent, manganese 0.7 percent maximum, phosphorus 0.10 percent maximum, sulfur 0.03 percent maximum, with chromium 0.5 to 1.1 percent in some variants to enhance scaling resistance. The high silicon and controlled residuals produce a fully ferritic matrix with excellent oxidation behavior.
Heat Treatment and Delivery
The castings are supplied as-cast or annealed, with ferritizing annealing recommended to eliminate pearlite and carbides for maximum ductility and oxidation resistance. The specified mechanical properties are verified on separately cast test bars per GB/T 9437.
Mechanical and High-Temperature Properties
At room temperature the material provides moderate tensile strength with good ductility for a cast iron, and the key property is long-term resistance to scaling and growth at elevated temperatures. The thermal conductivity and thermal shock resistance support furnace service with cyclic heating.
Applications
RQTSi5 is used for furnace grates, annealing pots, heat treatment trays, kiln furniture, glass molds, and components in industrial furnaces, boiler fittings, and other equipment operating continuously at high temperature, where silicon-bearing ductile iron outperforms ordinary gray iron.
Frequently Asked Questions
Q: What does RQTSi5 mean?
A: Heat-resistant ductile iron with about 5 percent silicon per GB/T 9437.
Q: What temperature can it serve?
A: Continuous service to about 650 to 900 degrees C depending on atmosphere.
Q: What is the silicon content?
A: About 4.5 to 5.5 percent.
Q: What is the standard?
A: GB/T 9437 for heat-resistant cast iron.
Q: What heat treatment is used?
A: Ferritizing annealing to remove pearlite and carbides.
Q: Where is it used?
A> Furnace parts, trays, kiln furniture, and high-temperature equipment.
For RQTSi5 castings and heat-resistant iron products, contact our sales team.

