Q345B is a relatively new steel grade introduced in the latest version of the Chinese steel standard GB/T1591-2008. Before this version, S355JR+AR hot-rolled steels from the European and British steel standard BS EN10025-2 were commonly used as low-alloy, high-strength steels.
Q345B H-beams and S355JR+AR H-beams are equivalent in chemical composition and mechanical properties, as shown in the following comparison.
S355JR Steel Grades
S355JR+AR: Hot-rolled under "as-rolled" conditions.
S355JR+N: Rolled with heat treatment (normalized), which improves uniformity of grain size and microstructure.
S355JR H-beams are also equivalent to ASTM A572 Grade 50, DIN 17100 St50-2, and JIS G3101 SS540.
Chemical Composition (Max % by Heat Analysis)
| Standard | Grade | C | Mn | P | S | Si | N | Cu |
|---|---|---|---|---|---|---|---|---|
| EN 10025-2 | S355JR+AR | 0.24 | 1.60 | 0.035 | 0.035 | 0.55 | 0.012 | 0.55 |
| GB/T 1591 | Q345B | 0.24 | 1.60 | 0.035 | 0.035 | 0.55 | 0.012 | 0.40 |
Mechanical Properties
| Standard | Grade | Thickness (t≤16 mm) | Yield Strength (MPa) | Tensile Strength (MPa) |
|---|---|---|---|---|
| EN 10025-2 | S355JR+AR | ≤16 | 355 | 470–630 |
| GB/T 1591 | Q345B | ≤16 | 355 | 470–630 |
Q345B H-beams and S355JR+AR H-beams show equivalent chemical compositions and mechanical properties, making them fully interchangeable in structural applications requiring high strength, toughness, and weldability.


