Products Description
EN10025-5 S235J0W steel plate is weathering steel.S235J0W steel plate, under European standard EN10025-5.EN10025-5 S235J0W steel plate is mainly used in hard weather owing to its property for resisting corrosion.
With a minimum yield strength of 235 MPa, the tensile strength for the thickness below 100mm shall be within 360 to 510 MPa.
EN10025-5 S235J0W Weathering steel Plate Specification
Thickness:2mm-300mm
Width:1000mm-4200mm
Length:3000mm-18000mm
Chemical composition % of steel S235J0W (1.8958): EN 10025-5-2004
| Method of deoxidation FN = rimming steels not permitted For long products the P and S content can be 0.005% higher The steels may show a Ni content of max. 0,65 % It is permissible to exceed the specified values provided that for each increase of 0,001 % N the P max. content will be reduced by 0,005 %; the N content of the ladle analysis, however, shall not be more than 0,012 %. The max. value for nitrogen does not apply if the chemical composition shows a minimum total Al content of 0,020 % or if sufficient other N binding elements are present. The N binding elements shall be mentioned in the inspection document. |
| C | Si | Mn | P | S | Cr | N | Cu | CEV |
| max 0.13 | max 0.4 | 0.2 - 0.6 | max 0.035 | max 0.035 | 0.4 - 0.8 | max 0.009 | 0.25 - 0.55 | max 0.44 |
Mechanical properties of steel S235J0W (1.8958)
| Nominal thickness (mm): | to 3 | 3 - 100 | 100 - 150 |
| Rm - Tensile strength (MPa) | 360-510 | 360-510 | 350-500 |
| Nominal thickness (mm): | to 16 | 16 - 40 | 40 - 63 | 63 - 80 | 80 - 100 | 100 - 150 |
| ReH - Minimum yield strength (MPa) | 235 | 225 | 215 | 215 | 215 | 195 |
| KV - Impact energy (J) longitud., | -20° 27 |
0° 27 |
| Nominal thickness (mm): | 1.5 - 2 | 2 - 2.5 | 2.5 - 3 |
| A - Min. elongation Lo = 80 mm (%) | 19 | 20 | 21 |
| Nominal thickness (mm): | 3 - 40 | 40 - 63 | 63 - 100 | 100 - 150 |
| A - Min. elongation Lo = 5,65 √ So (%) | 26 | 25 | 24 | 22 |
Equivalent grades of steel S235J0W (1.8958)
| EU EN |
France AFNOR |
England BS |
European old EN |
Italy UNI |
||||
| S235J0W |
|
|
|
|
Products Application
S235J0W steel plate is mainly of Steel Resistant to Atmospherical Corrosion. S235J0W steel plate would be used to build containers that can bear low-temperature seawater.
S235J0W steel plate is a structural steel grade which be used in riveted, bolted, or welded construction of bridges and buildings.
Contact now to get S235J0W Quote
