Knowledge

EN10028-6 P690Q - Steel Plate Grade

Jan 23, 2026 Leave a message

info-474-306

P690Q is a high-strength, quenched and tempered (Q+T) fine-grain, weldable steel plate designed for pressure vessels, boilers, and high-temperature equipment, adhering to EN 10028-6 standards. It provides a minimum yield strength of 690 MPa, commonly used in demanding structural, chemical, and energy applications.

 

P690Q Chemical Composition

Grade

The Element Max (%)

C

Si

Mn

P

S

N

B

P690Q

0.20

0.80

1.70

0.025

0.015

0.015

0.005

Mo

Cu

Nb

Ni

Ti

V

Cr

0.70

0.3

0.06

2.50

0.05

0.12

1.50

 

Grade

 

P690Q Mechanical Property

Thickness

Yield

Tensile

Elongation

P690Q

mm

Min Mpa

Mpa

Min %

6-50

690

770-940

14%

50-100

670

770-940

14%

100-150

630

720-900

14%

 

 

info-539-515Applications

Pressure Vessels and Boilers:

It is a preferred material for manufacturing pressure vessels, boilers, and heat exchangers used in petrochemical, thermal power, and chemical processing industries. These components often operate under high internal pressure and temperature fluctuations, and P690Q's excellent strength and toughness ensure safe and stable operation over long periods.

Offshore and Marine Engineering:

In offshore oil and gas exploration platforms, ship hulls, and marine pipelines, P690Q is used to withstand harsh marine environments such as saltwater corrosion, low temperatures, and strong wind loads. Its resistance to brittle fracture at low temperatures and good weldability make it suitable for offshore structural components that require high reliability.

Heavy Machinery and Construction:

It is applied in the manufacturing of heavy machinery parts, such as excavator arms, crane booms, and hydraulic cylinders, as well as large-scale construction structures like bridges and stadiums. The high strength of P690Q allows for the design of lighter and more compact components without compromising structural integrity, reducing overall equipment weight and improving efficiency.

Nuclear Power Industry:

Some auxiliary components in nuclear power plants, such as pressure pipelines and storage tanks, also adopt P690Q. It meets the strict safety requirements of the nuclear industry, providing stable performance under high pressure and radiation environments.

 

Application Conditions

Temperature Range:

It performs well in low to medium temperature environments, typically suitable for operating temperatures ranging from -20℃ to 350℃. It maintains good toughness and ductility at low temperatures, avoiding brittle fracture, while its mechanical properties remain stable at medium temperatures without significant degradation.

Pressure Bearing Requirements:

It is designed for high-pressure service conditions, capable of withstanding high internal or external pressures. It is commonly used in components with working pressures above 10MPa, such as high-pressure pipelines and pressure vessels, where its high yield strength and tensile strength can effectively resist pressure-induced deformation and failure.

Environmental Adaptability:

It is suitable for harsh environments including humid, corrosive (mild), and low-temperature scenarios. However, in highly corrosive environments (such as strong acid/alkali media), additional anti-corrosion treatments (e.g., coating, galvanizing) are required to extend its service life. It also adapts well to outdoor and marine environments with large temperature variations.

Fabrication and Welding Conditions:

Its application requires strict adherence to appropriate fabrication and welding processes. Welding must be performed using matching electrodes and proper heat treatment procedures (preheating and post-weld heat treatment) to avoid welding defects (e.g., cracks, porosity) and ensure that the welded joints maintain the same mechanical properties as the base material. Fabrication processes such as bending and forming should also be controlled within a reasonable temperature range to prevent material damage.

 

info-255-131P690Q Processing Flow 

Raw Material Preparation: Select high-quality steel billets that meet chemical composition standards. Conduct pre-inspection to remove surface defects like cracks and inclusions, ensuring the billets are free of impurities that could affect subsequent processing.

Heating and Rolling: Heat the billets to a suitable temperature (typically 1100-1250℃) in a heating furnace, then perform hot rolling. Control the rolling speed and pressure evenly to form the desired plate or section, while refining the grain structure to enhance strength.

Quenching and Tempering: Quench the rolled steel rapidly in water or oil to obtain a martensitic structure, improving hardness and strength. Then temper it at 550-650℃ to reduce brittleness, balance toughness and ductility, and stabilize the material's mechanical properties.

Post-Processing and Inspection: Conduct surface treatment (grinding, derusting) to remove oxide scales. Perform strict inspections, including mechanical property testing (tensile, impact tests), dimensional measurement, and non-destructive testing (ultrasonic flaw detection) to ensure compliance with technical standards.

Cutting and Forming: Cut the qualified steel into specified sizes using cutting equipment (flame cutting, plasma cutting). Carry out forming processes (bending, stamping) under appropriate temperature control to avoid material damage and maintain structural integrity.

Contact now

 

If you want to learn more about GNEE's products, you can send an email to beam@gneesteelgroup.com. We are more than happy to assist you.

 

 

What is P690Q?

P690Q is a high-strength quenched and tempered alloy structural steel. It has excellent mechanical properties, including high tensile strength and toughness, widely used in heavy machinery, engineering structures and other fields requiring high load-bearing capacity.

 

What are the main mechanical properties of P690Q?

P690Q features high tensile strength (minimum 690MPa), good yield strength, excellent impact toughness even at low temperatures, and good ductility, ensuring reliability under heavy load and harsh working conditions.

 

What is the heat treatment process of P690Q?

P690Q typically undergoes quenching and tempering heat treatment. Quenching involves heating to a suitable temperature and rapid cooling, followed by tempering at a certain temperature to reduce brittleness and improve toughness and machinability.

 

In which industries is P690Q commonly used?

P690Q is widely applied in industries such as construction machinery (excavators, cranes), offshore engineering, bridge construction, pressure vessel manufacturing, and heavy-duty equipment due to its high strength and durability.

 

What is the minimum yield strength of P690Q?

The minimum yield strength of P690Q is usually 690MPa, which is a key indicator reflecting its ability to resist plastic deformation under load, making it suitable for structures bearing large stresses.

 

Can P690Q be welded easily?

P690Q can be welded, but it requires proper welding processes and materials due to its high strength. Preheating and post-weld heat treatment are often needed to avoid welding cracks and ensure joint performance.

 

What is the chemical composition characteristic of P690Q?

P690Q contains alloying elements such as manganese, chromium, molybdenum, and nickel. These elements enhance its strength, toughness, and corrosion resistance, while controlling carbon content to balance strength and weldability.

 

What is the application of P690Q in offshore engineering?

In offshore engineering, P690Q is used to manufacture offshore platforms, oil rigs, and underwater pipelines. Its high strength and corrosion resistance can withstand harsh marine environments such as salt spray and high pressure.

 

How does temperature affect the performance of P690Q?

P690Q maintains good mechanical properties within a certain temperature range. At low temperatures, it still has high impact toughness, while at high temperatures, its strength may decrease slightly, but it can meet most working condition requirements.

 

What standards does P690Q comply with?

P690Q usually complies with European standards such as EN 10025 or EN 10225, which specify its chemical composition, mechanical properties, heat treatment, and testing methods to ensure product quality and consistency.

Send Inquiry