Dimensional parameters of American standard H-beam W10x100

Naming rules: W stands for "Wide Flange", 10 means the flange width is about 10 inches (254mm), and 100 means 100 pounds per foot (about 149kg/m).

W10x100 h section steel column Sectional dimensions
Height: 282mm
Flange width: 263mm
Web thickness: 17.3mm
Flange thickness: 28.4mm
Theoretical weight: 149kg/m2.

W10x100 wf h beam Material standards
Common materials: A36, A992, A572 GR50, etc., with high strength, low temperature resistance, corrosion resistance and other characteristics.
Certification standards: in accordance with ASTM (American Society for Testing and Materials) specifications.

W10x100 steel h beam for sleeper Structural advantages
Stress dispersion: The H-section design is reasonable, with wide flanges and thin webs, which effectively disperses stress and improves overall stability.
Dimensional accuracy: High-precision rolling process ensures tolerance control (within ±1mm), which is convenient for splicing and installation.
Mechanical properties: high bending strength (up to 450MPa or more), good toughness, suitable for heavy-load scenarios.

W10x100 wide flange h beam processing and construction
1. The inner and outer sides of the flange are parallel, and the welding combination performance is excellent, avoiding stress concentration caused by corner effect.
2. Supports customized deep processing such as cutting, punching, and galvanizing to adapt to complex construction needs.

W10x100 wf steel beam material selection
A36: General building structure.
A992: Preferred for earthquake resistance of high-rise buildings.
A572 GR50: Highly corrosive environments such as marine engineering.
Selection suggestions: If higher load-bearing capacity is required, you can upgrade to the W12 or W14 series; the W8 series can be selected for light-load scenarios.