Beams Wide Flange (W) w30x191
Basic specifications
W30x191 steel h beam belongs to the American standard H-beam series. The "W" in its specification representation method stands for wide flange, and the numbers 30 and 191 represent the section height and flange width respectively. According to relevant information, the specific dimensions may include:
Section height: 30 inches (about 762mm)
Flange width: 191 inches (about 4856mm)
Flange thickness and web thickness vary depending on the specific model. Usually the flange thickness is larger and the web is thinner.
Weight per meter: Depending on the material and thickness, it may be between 134-196kg/m.
Material and performance
Common materials of W30x191 structural h beam include A36, A572GR50 and A992, which have different mechanical properties and chemical compositions.
A36: A low-carbon steel with good plasticity and weldability, suitable for general structures and buildings.
A572GR50: A high-strength low-alloy steel with higher yield strength, suitable for projects requiring higher load-bearing capacity.
A992: A modified high-strength low-alloy steel with higher yield strength and tensile strength, suitable for bridges and high-rise buildings.
The H-beam has a reasonable cross-section design, wide and parallel flanges, and a thin web, with the following performance advantages.
High load-bearing capacity: It provides a higher section modulus and moment of inertia than ordinary I-beams at the same weight.
Strong bending resistance: It can withstand bending moments from different directions and is suitable for complex stress environments.
Convenient construction: Due to its structural characteristics, it is easy to weld and install, saving construction time.
Production process
The production process of W30x191 steel beam h mainly includes the following steps
Raw material preparation: Use special-shaped billets or continuous casting billets as raw materials.
Heating: Heat the billet to 1200~1250℃ for subsequent rolling.
Descaling and rolling: After descaling by high-pressure water, it is sent to the slab mill for preliminary rolling, and then the final forming is completed by the universal roughing mill and finishing mill.
Cooling and straightening: The cooling speed is controlled by vertical cooling to avoid the waist wave phenomenon, and then straightening is carried out.
Cutting and sorting: Cut according to the fixed length, and sort, stack and bundle according to the specifications and grades.
Summary
W30x191 H-beam is a high-strength, large-size wide flange H-beam with superior mechanical properties and wide applicability. Its reasonable cross-sectional design and diverse material selection make it occupy an important position in construction, bridges and industrial engineering.
For more detailed information or quotation, please feel free to contact GNEE!


