Knowledge

Beams Structural Wide Flange Beams W12x252

May 19, 2025 Leave a message

Beams Structural Wide Flange Beams W12x252

 

W12x252 h beam structure Model Meaning


W: stands for wide flange steel.
12: indicates that the nominal height of the steel is about 12 inches. However, the actual height of the W12x252 steel is greater than the nominal height, which is 15.4 inches (about 391.2 mm).
252: refers to the theoretical weight of about 252 pounds per foot of length (that is, 252lb/ft, which is about 375.7 kg/m in metric terms).

 

 

W12x252 h beam size

 

parameter Numeric
Height (h) 15.4 inches (approx. 391.2 mm)
Flange width (bf) 13 inches (about 330.2 mm)
Web thickness (tw) 1.4 inches (about 35.6 mm)
Flange thickness (tf) 2.25 inches (approx. 57.2 mm)
Fillet radius at the junction of web and flange (R) 0.6 inches (about 15.2 mm)
Cross-sectional area (A) 74.1 square inches (about 478.1 square centimeters)

 

 

W12x252 wide flange beam mechanical properties


Material: A992 or A572GR50 are usually used. Taking A992 as an example, its mechanical properties are as follows.
Tensile strength (σb): ≥560MPa.
Yield strength (σs): ≥460MPa.
Elongation (δ5): ≥10%.
Sectional shrinkage (ψ): ≥45%.
Impact energy (Aku): ≥39J.
Impact toughness value (αkv): ≥49J/cm².
Hardness: ≤229HB.

 

 

W12x252 w wide flange beam section characteristics


Moment of inertia (Ix): about 2720in⁴ (around the strong axis, that is, the height direction of the section, about 11321cm⁴).
Moment of inertia (Iy): about 828in⁴ (about the weak axis, i.e. the flange width direction, about 3447cm⁴).
Section modulus (Sx): about 358in³ (about the strong axis, about 5866cm³).
Section modulus (Sy): about 127in³ (about the weak axis, about 2081cm³).

 

 

W12x252 w flange beam application scenarios


Construction field: commonly used in the frame structure of large commercial buildings and high-rise buildings, as the main load-bearing beams and columns, it can withstand huge loads. For example, in the construction of some large shopping malls and office buildings, W12x252 steel can be used to support the weight of multi-story floors and roofs.
Bridge engineering: It can be used as the main beam structure of the bridge. Because of its high strength and rigidity, it can withstand vehicle loads and environmental loads to ensure the safe use of the bridge.
Industrial plant: Suitable for the construction of heavy industrial plants, such as those in machinery manufacturing, metallurgy and other industries, and can meet the load-bearing requirements of heavy equipment such as crane beams.

 

h profile steel

 

Send Inquiry