Knowledge

American W16x45 Wide Flange Beam: ASTM A572-50 Guide

May 20, 2025 Leave a message

The W16x45 is an American standard wide flange beam, rolled in the W-shape series and commonly supplied in ASTM A572 Grade 50 high-strength low-alloy steel. The designation W16x45 means a nominal depth of about 16 inches, equal to about 406 mm, and a nominal weight of 45 pounds per foot, about 67 kg per meter; the number 45 does not describe the flange width. The actual flange width of this section is about 7 inches, roughly 178 mm. A572 Grade 50 guarantees a minimum yield strength of 345 MPa, equal to 50 ksi, and a minimum tensile strength of 450 MPa, which makes the beam suitable for load-bearing structures, machinery frames, and bridge and building construction. This article explains the designation, material, properties, and applications.

Understanding the W16x45 Designation

In the American wide flange naming system, a W-shape is described by its nominal depth and its mass per unit length. W16x45 means a nominal depth of 16 inches and a nominal weight of 45 pounds per foot, which is about 406 mm in depth and 67 kg per meter. A common misunderstanding is to read the second number as a flange width; in fact, the 45 is purely a weight designation. For the W16x45 section, the actual flange width is approximately 7 inches, about 178 mm, with a web thickness of about 0.35 inch and a flange thickness of about 0.56 inch. These dimensions follow the standard W-shape series tables used by designers in North America.

Material: ASTM A572 Grade 50

A572 Grade 50 is a high-strength low-alloy structural steel defined in ASTM A572, with a minimum yield strength of 50 ksi, about 345 MPa, and a minimum tensile strength of 65 ksi, about 450 MPa. The chemistry is limited to maximum carbon of 0.23 percent, manganese of 1.35 percent, silicon of 0.40 percent, phosphorus of 0.04 percent, and sulfur of 0.05 percent. The low carbon content gives the steel good weldability, while the microalloy additions provide the strength of a higher-grade material without the cost of full alloy steel. Because the properties are consistent and certified, A572 Grade 50 is a standard choice for structural shapes in the United States.

Dimensions and Section Properties

The W16x45 beam has a nominal depth of about 406 mm, a flange width of about 178 mm, a web thickness of about 8.8 mm, and a flange thickness of about 14.2 mm. The section modulus and moment of inertia are published in the AISC steel construction manual, and designers use these values to check bending, shear, and deflection. The shape of the section, with wide flanges and a relatively thin web, is efficient for resisting bending about the strong axis, which is why W-shapes dominate steel frame construction. The weight of 45 pounds per foot, about 67 kg per meter, is used for estimating material cost and transport loads.

Performance Characteristics

The W16x45 in A572 Grade 50 combines high strength with good mechanical behaviour. It exhibits excellent resistance to bending, shear, and tension under both dynamic and static loads, which is essential for structural safety. The material is durable and maintains stable performance under a variety of environmental conditions, and its weldability allows a wide range of connection methods, including welded moment connections and bolted splices. Because the yield-to-tensile ratio is favorable, the beam gives visible warning before failure and performs predictably in overload conditions.

Applications

The W16x45 wide flange beam is used for load-bearing structures such as factory buildings, bridges, and high-rise building frames, where the combination of strength and section efficiency reduces steel tonnage. In machinery manufacturing, it serves as frames and support members, and in automobile manufacturing it is used for structural and support parts. The section is also found in shipbuilding, storage facilities, and other fields where long, straight members with high bending capacity are required. Standard lengths are typically supplied from stock, with cutting and connection preparation performed to the designer's requirements.

Frequently Asked Questions

1. What does W16x45 mean?

W16x45 means a wide flange beam with a nominal depth of 16 inches, about 406 mm, and a nominal weight of 45 pounds per foot, about 67 kg per meter.

2. What is the flange width of W16x45?

The flange width is approximately 7 inches, about 178 mm; the 45 in the designation is the weight per foot, not the flange width.

3. What is the yield strength of A572 Grade 50?

The minimum yield strength is 50 ksi, about 345 MPa, with a minimum tensile strength of 65 ksi, about 450 MPa.

4. Can W16x45 beams be welded?

Yes, A572 Grade 50 has good weldability, and the beams can be welded, cut, and drilled with standard shop practices.

5. What are typical applications of W16x45?

Typical applications include factory and high-rise building frames, bridges, machinery frames, vehicle structural parts, and shipbuilding structures.

6. What standard governs the W16x45 beam?

The beam is rolled to the ASTM A572 specification for material and follows the AISC standard W-shape series for dimensions and section properties.

Send Inquiry