A537 Class 3 refers to a type of heat-treated carbon-manganese-silicon steel plate (ASTM A537/ASME SA537 Class 3) specifically designed for fusion-welded pressure vessels and structures, known for its higher strength due to quenching and tempering (Q&T). It provides a minimum yield strength of 380 MPa (55 ksi) for thicker plates and offers good strength and toughness for moderate-pressure applications, often found in boilers and storage tanks.
►Mechnical property for A537 CL3 steel plate:
| Thickness(mm) | Yield strength (≥Mpa) | Tensile strength (Mpa) | Elongation in ≥,% | |
| 200mm | 50mm | |||
| T≤65 | 380 | 550-690 | ... | 22 |
| 65<T≤100 | 345 | 515-655 | ... | 22 |
| 100<T | 275 | 485-620 | ... | 20 |
►Chemical composition for A537 CL3 steel plate (Heat Analysis Max%)
| Main chemical elements composition of A537CL3 steel plate | |||||||||
| Thickness(mm) | C | Si | Mn | P | S | Cu | Ni | Cr | Mo |
| T≤40 | 0.24 | 0.13-0.55 | 0.64-1.46 | 0.035 | 0.035 | 0.38 | 0.28 | 0.29 | 0.09 |
| 40<T | 0.92-1.72 | ||||||||
processing
1. Steelmaking and Rolling
Melting Process: The steel must be killed steel and manufactured to meet a fine austenitic grain size requirement.
Forming: Steel ingots or slabs are hot-rolled into plates. According to the ASTM A537 Standard, Class 3 plates are typically produced up to a maximum thickness of 150 mm (6 inches).
2. Heat Treatment (Core Process)
A537 Class 3 is strictly defined by its Quenched and Tempered (Q&T) thermal cycle:
Austenitizing & Quenching: The plates are heated to a uniform temperature (typically between 860°C and 880°C) to transform the structure into austenite. They are then rapidly cooled by liquid quenching (water or oil) to produce a hardened martensitic or bainitic microstructure.
Tempering:
The plates are reheated to a temperature of not less than 620°C (1150°F).
This step relieves internal stresses and optimizes the balance between high strength and excellent notch toughness.
3. Testing and Quality Control
After heat treatment, the material must pass rigorous mechanical tests:
Tensile Testing:
Yield Strength: Minimum 380 MPa (55 ksi).
Tensile Strength: 515–655 MPa (75–95 ksi).
Impact Testing: Charpy V-Notch (CVN) tests are conducted to ensure the material remains ductile at low temperatures.
Non-Destructive Testing (NDT): Ultrasonic Testing (UT) is often performed according to ASTM A578 to ensure internal soundness and detect lamination or inclusions.
4. Finishing and Inspection
Leveling: Plates are processed through a roller leveler to achieve high flatness.
Cutting: Precision cutting (Plasma, Oxy-fuel, or Laser) based on customer specifications.
Marking: Each plate is stenciled with the heat number, grade, and "Class 3" designation for traceability.
Common Applications
Pressure Vessels: Boilers and tanks operating at moderate to low temperatures.
Storage Tanks: Used in the construction of API 650/620 tanks for oil and gas.
Petrochemical Industry: Separators, heat exchangers, and spherical tanks.
Contact us at beam@gneesteelgroup.com for pricing, technical support, or customized solutions. We are always ready to support your project.
Why are phosphorus and sulfur kept low in ASTM A537 Class 3?
Phosphorus and sulfur are limited to reduce embrittlement and improve toughness. Phosphorus can cause cold shortness, while sulfur forms brittle sulfide inclusions. Controlling these elements ensures better weldability and resistance to cracking in pressure vessel applications.
What are the typical dimensions of ASTM A537 Class 3 plates?
ASTM A537 Class 3 plates are produced in various thicknesses, commonly up to 150 mm. Widths and lengths depend on manufacturing capabilities but typically range from 1500 to 4000 mm and 6000 to 12000 mm, respectively. Thicker plates require special heat treatment to maintain properties.
What surface quality requirements apply to ASTM A537 Class 3?
ASTM A537 Class 3 plates must have a clean surface free of cracks, laminations, and excessive porosity. Minor imperfections may be removed by grinding, provided thickness limits are maintained. Manufacturers must perform visual inspections and ultrasonic testing to ensure surface and internal quality.
What ultrasonic testing is required for ASTM A537 Class 3?
ASTM A537 Class 3 plates usually undergo ultrasonic inspection per ASTM A609 or similar standards. This test detects internal flaws such as laminations, voids, and inclusions. The extent of testing depends on plate thickness and application requirements, ensuring structural integrity in pressure vessels.
What is the maximum hardness allowed for ASTM A537 Class 3?
ASTM A537 Class 3 typically has a maximum hardness of 235 HB. This limit ensures good weldability and toughness. Hardness testing is performed after heat treatment to verify that the material is not over-tempered or under-tempered, maintaining the required strength balance.
What preheating is recommended when welding ASTM A537 Class 3?
Preheating temperatures for ASTM A537 Class 3 depend on thickness and welding process but often range from 100 to 200°C. Preheating reduces the risk of hydrogen-induced cracking by slowing cooling rates in the heat-affected zone. Thicker plates require higher preheat to ensure proper fusion and toughness.
Is post-weld heat treatment (PWHT) required for ASTM A537 Class 3?
PWHT is often recommended for ASTM A537 Class 3, especially for thick sections or highly restrained joints. It reduces residual stresses, improves toughness, and stabilizes the microstructure. Typical PWHT temperatures range from 550 to 620°C, depending on design and code requirements.
What welding consumables are suitable for ASTM A537 Class 3?Suitable consumables for ASTM A537 Class 3 include low-hydrogen electrodes such as E7018 for SMAW. For GMAW, ER70S-6 is commonly used, while FCAW may use E71T-1. SAW typically employs EL8 electrodes with matching fluxes. Consumables should provide good toughness and strength matching.
What are the advantages of ASTM A537 Class 3 over A516 grades?
ASTM A537 Class 3 offers higher strength than A516 grades, allowing thinner plates and weight reduction. It also provides better low-temperature toughness due to normalization and tempering. These benefits make it suitable for more demanding pressure vessel and storage tank applications.
What are the limitations of ASTM A537 Class 3?
ASTM A537 Class 3 may have higher material and processing costs compared to lower-strength carbon steels. It also requires careful welding procedures and may need PWHT for thick sections. Additionally, its availability in very thick plates can be limited, requiring special production arrangements.
What industries commonly use ASTM A537 Class 3?
ASTM A537 Class 3 is widely used in the oil, gas, and petrochemical industries for pressure vessels and storage tanks. It is also found in power plants, refineries, and offshore structures where high strength and low-temperature toughness are required. Its weldability makes it suitable for large fabricated structures.
What standards should be referenced when fabricating with ASTM A537 Class 3?
Fabrication of ASTM A537 Class 3 typically references ASME Section II for material acceptance and ASME Section VIII for pressure vessel construction. Welding procedures follow AWS D1.1 or ASME Section IX. Testing standards include ASTM A370 for mechanical tests and ASTM A609 for ultrasonic inspection.



