Hot-rolled Section Steel Product Applications:
High strength: Hot-rolled steel sections are processed through the hot-rolling process, possessing high strength and rigidity, enabling them to withstand the loads and impact forces during the operation of forklifts.
Good plasticity and weldability: Hot-rolled steel sections have excellent plasticity and can be processed and formed into various required shapes and sizes. At the same time, they also have good weldability, facilitating connection and assembly.
Corrosion resistance: Hot-rolled steel sections usually undergo surface treatments such as galvanizing and spraying to enhance their corrosion resistance and extend their service life.
Economical and practical: The production process of hot-rolled steel sections is relatively simple and the cost is low, so they have high economic efficiency and practicality.
Using hot-rolled steel sections to manufacture forklift mast can ensure the firm and stable structure of the forklift and provide sufficient load-bearing capacity.
The GNEE Group can provide hot-rolled steel for forklifts. The main production models are shown in the following table.
Available Grade, specification and uses
|
Grade |
Specification |
Delivery standard |
Features and Uses |
|
Q460E |
H98～H130 C120～C220 J120～J160 |
YB/T 4237-2010 and the user's technical delivery conditions |
The product has high requirements for surface hardness, low temperature toughness, size tolerance and shape deviation. It's mainly used for the production of forklift portal. |
|
MGC570C |
|||
|
MGC490C |
Mechanical and technological properties
|
Grade |
Yield Strength ReL/MPa |
Tensile strength Rm/MPa |
Elongation A/% |
Impact Energy |
Hardness HB |
180° cold bending test |
||
|
temperature℃ |
KV2/J |
≤16 |
>16~35 |
|||||
|
Q460E |
≥440 |
≥550~720 |
≥17 |
-30 |
≥34 |
- |
- |
- |
|
MGC570C |
≥400 |
≥570 |
≥14 |
-5 |
≥27 |
≥170 |
d=2a |
d=3a |
|
MGC490C |
≥335 |
≥490 |
≥16 |
0 |
≥34 |
≥140 |
d=2a |
d=3a |
We were founded in 2008 and have now developed into a comprehensive steel supply chain enterprise. After years of development, the company has a production, procurement, operation, sales and management team of more than 200 people, and a factory area of more than 35,000 square meters. The company's steel products are exported to more than 200 countries and regions around the world and are widely used in many fields such as railway tracks, automotive bearings, ship anchor chains, petrochemicals, offshore engineering, nuclear power, and wind power.
In addition to the above products, we also provide a wider range of steel products to meet different project requirements. Please contact us.beam@gneesteel.com
