I-beam, also called steel beam, is a steel bar with an I-shaped cross-section. There are two types of I-beams, one is ordinary and the other is light. This is a type of steel with an "I"-shaped cross section.
Whether it is an ordinary I-beam or a lightweight I-beam, it is because their cross-sections are very high and narrow, and the moments of inertia of the two main axes are very different, so they are all on the plane where they are located. Used directly. online. It can also be made into a lattice-type stressed component. This method is not suitable for axial compression members and curved members parallel to the web, so its scope of use is very limited. I-beam is a commonly used steel material and a commonly used steel material.


So why is the I-beam flange thicker than the web?
For steel beams, if the height-to-thickness and width-to-width ratios of the web and flange are too large, the web and flange of the beam will deflect, leading to structural failure. Exhaustion of energy or loss of overall stability. The local instability of the beam is a typical wave buckling.
It is designed based on mechanical principles and using the least amount of material on the premise of meeting the load. Its structure is related to the height of the web.


The cross-sectional forms of steel structure beam and column flange plates include "i, T, ⊥, L, Г, Π", etc. It includes horizontal and vertical parts. The vertical bars are called webs because they are located at the waist and abdomen; the transverse members are called flanges, which are far away from the centroid of the section and have a great impact on the bending stiffness of the members. Therefore, flanges are often used in steel production. That's why, it's thicker than the net.


The above is the reason why the I-beam flange is thicker than the web. If you want to know more, please feel free to follow GNEE.

