Stainless steel round bars and rebar are both commonly used in construction projects, but they have different names for different types of steel bars. During their use, these two types of steel bars mainly reflect the following five differences:
1. Different appearance.
The outer surface of the stainless steel round rod is smooth; the outer surface of the rebar has spiral ribs.

2. Different strengths.
The design strength of stainless steel round bars is 210MPa; the strength of rebar is higher than that of stainless steel round bars. The design strength of HRB335 is 300MPa; the design strength of HRB400 is 360MPa.

3. Different steel types (different chemical compositions).
Stainless steel round bars are stainless steel, rebar is low alloy steel, HRB335 grade steel bar is 20MnSi (20 manganese silicon); HRB400 grade steel bar is 20MnSiV or 20MnSiNb or 20MnTi, etc.;

4. Different production standards.
In the current standards, round steel refers to HPB235 grade steel bars, and its production standard is "Hot-rolled Smooth Steel Bars for Reinforced Concrete" (GB13013); rebar generally refers to HRB335 and HRB400 grade steel bars, and its production standard is "Hot-rolled Smooth Steel Bars for Reinforced Concrete" (GB13013). Hot-rolled ribbed steel bars" (GB1499).

5. Different physical and mechanical properties.
Due to the different chemical composition and strength of steel bars, their physical and mechanical properties are different. Stainless steel round bars have better cold bending properties and can be used for 180-degree curved hooks, while rebar can only be used for 90-degree straight hooks; stainless steel round bars have good weldability, and ordinary carbon welding rods can be used, while rebar must Use low-alloy welding rods; rebar has better toughness and fatigue resistance than stainless steel round bars.


