S355J2 HEA260 HEB260 H Beam For Column

HEA260 h steel profile
Dimensions: HEA steel profiles usually have narrow flanges. For HEA260, the specific dimensions are 250mm (web height) × 260mm (flange width) × 7.5mm (web thickness) × 12.5mm (flange thickness).

Material: S355J2 is a low-alloy, high-strength structural steel suitable for low-temperature environments and can ensure impact toughness at -20°C. This steel meets the requirements of European standard EN 10025-2.

Mechanical properties: Yield strength is not less than 355MPa; tensile strength ranges from approximately 470 to 630MPa; has good weldability and processability.

Application scenarios: Due to its compact cross-sectional dimensions and good force-bearing performance, HEA260 is often used to manufacture various mechanical parts and components, such as crane arms, excavator buckets, etc.

HEB260 steel beam
Dimensions: Compared with HEA h section beam, HEB steel has wider flanges, providing larger cross-sectional area and higher section modulus. The specific dimensions of HEB260 h section steel are 260mm (height) × 260mm (width) × 10mm (web thickness) × 17.5mm (flange thickness).

Material: S355J2 material is used, and it is suitable for use in low temperature environments.

Mechanical properties: Same as HEA260 h beam structure, due to the larger cross-sectional size, HEB260 can withstand greater bending moments and shear forces.

Application scenarios: HEB260 h shaped beam is widely used in large building structures and bridge projects to ensure the safety and stability of the structure. Due to its high load-bearing capacity and stability, it is also often used as beams, columns and other key supporting components.