S275JR S235J0 HEA260 h steel profile beam
HEA260 h section beam steel parameters
Dimensions: 250mm (flange width) × 250mm (height) × 7.5mm (flange thickness) × 12.5mm (web thickness).
Weight per meter: 68.2 kg/m.
Applicable standards: European standard EN10162/EN10163, materials cover two types: S275JR and S235J0.
Material comparison
S275JR h beam structure
Yield strength ≥ 275MPa, tensile strength ≥ 420MPa, elongation ≥ 20%912.
High-quality steel, needs to pass the impact test at room temperature (20℃), suitable for low temperature or high stress environment.
S235J0 h shaped steel
Yield strength ≥ 235MPa, tensile strength ≥ 375MPa, elongation ≥ 22%.
Ordinary steel, with lower impact requirements and lower cost, suitable for conventional structures.
Comparison of mechanical performance advantages
1. S275JR h-shaped steel is suitable for load-bearing scenarios such as bridges and heavy machinery due to its high strength and toughness; S235J0 steel h-beam is suitable for factories, ordinary building frames, etc.
2. Both are corrosion-resistant and can extend their service life after surface treatment.
Application areas of HEA260 h-section beam
Construction engineering: steel structure frame, floor support.
Infrastructure: highway guardrails, railway bridges.
Industrial equipment: metallurgical machinery, engineering machinery parts.
