How to extend the life of weather-resistant steel plates
1. The dust on the weather-resistant steel plate welded lead door should be cleaned regularly to keep the weather-resistant rust steel plate lead door clean and bright. Because even stainless steel, once it is contaminated with dust and dirt, the chemical substances in it will corrode the surface of the stainless steel. If things go on like this, the steel body will deteriorate and become rotten, affecting the operating performance of the radiation protection automatic lead door.
2. Once the weather-resistant steel plate lead door is contaminated with oil stains and other difficult-to-clean things, it can be scrubbed with Jieerliang. It is better not to use strong acid or strong alkali solution for cleaning. This will not only damage the surface finish of the profile, but also It will destroy the protective film and oxide layer on the surface of the hardware and cause corrosion of the hardware. Especially when some customers use sulfuric acid to clean the walls, be careful not to let the doors and windows become contaminated.
3. Granular and other debris on the inside of the frame should be cleaned up in time to prevent it from blocking the drainage channel and causing poor drainage and leakage. In serious cases, it will also affect the operation of the radiation protection automatic lead door and shorten the operating life of the automatic door, and There are also safety hazards.
4. When opening the weather-resistant steel plate lead door, the force should be moderate and try to keep the opening and closing speed even.
GNEE Group receives visiting customers
If you have more needs and questions about steel, please contact us!