Stainless steel angle steel can be classified according to material. Common ones include martensitic stainless steel, ferritic stainless steel, duplex stainless steel, austenitic stainless steel, precipitation hardening stainless steel, etc.

1.Austenitic stainless steel:The output and usage of this type of material occupy the mainstream position of products, accounting for 70.1% of the total stainless steel. It is a very important category in stainless steel. According to the alloy ratio, austenitic stainless steel can be divided into two categories: chromium-nickel steel and iron-chromium-manganese steel. The former uses nickel as the austenitizing element and is the main body of austenitic steel. Considering the production cost, the latter is a nickel-saving steel that uses manganese and nitrogen instead of expensive nickel. Austenitic steel has good corrosion resistance and good comprehensive mechanical and process properties, but its strength and hardness are weak.

2. Ferritic stainless steel:Ferritic stainless steel contains 11%-30% chromium and basically contains no nickel. It is a nickel-saving steel type. The structure is mainly ferrite when in use. Ferritic stainless steel has high strength, low cold work hardening tendency, and excellent resistance to local corrosion such as chloride stress corrosion, pitting corrosion, and crevice corrosion. However, it is sensitive to intergranular corrosion and has poor low-temperature toughness.

3.Duplex stainless steel:Traditionally, it is believed that there is more than 15% ferrite on the austenite matrix. On the contrary, if there is more than 15% austenite on the ferrite matrix, we can call it austenite + ferrite duplex stainless steel. Duplex stainless steel combines the advantages of austenitic steel and ferritic steel.

4.Martensitic stainless steel:Martensitic stainless steel is a type of steel whose properties can be adjusted by heat treatment. It has high strength and hardness. Precipitation hardening stainless steel is steel that uses heat treatment to precipitate carbides in the steel to improve its strength.


