News

Brief Introduction To Span Bearing Ratio Of H-shaped Steel

Oct 27, 2023 Leave a message

The length of h steel span and load-bearing calculation is calculated in meters, of course, other units can be used, as long as other quantities such as bending moments and so on also use the same dimension.

11

H-shaped steel belongs to the middle airfoil H-shaped steel, and there are 294*200*9*12 specifications in the standard. According to this specification, the span of 14 meters is a little large, or the cross-section of the beam is a little small, only strong or equivalent to the roof purlin. Can't hold much weight. It is recommended to use more than 600*300*12*18 H-shaped steel from Gnee Steel World spot market.

27

Due to the above advantages, H-beam steel is widely used in: various civil and industrial building structures; A variety of long-span industrial plants and modern high-rise buildings, especially in areas with frequent seismic activity and high temperature working conditions; Large Bridges with large bearing capacity, good cross-section stability and large span are required; Heavy equipment; Highway; Ship skeleton; Mine support; Foundation treatment and dam engineering; Various machine components.

20

Send Inquiry