q550d-carbon-steel-h-beam—support heavy loads. In fact, they make up the most common component of structural framing systems. They can be used to build bridges, warehouses and other large buildings, and can even be used in machinery or to frame truck beds. Beams can be positioned on their sides or at an angle and connect to columns via bolts, welds, and beam supports.
q550d-carbon-steel-h-beam Product Description
|
Standard |
ASTM,AISI,SUS,JIS,EN,DIN,BS,GB,etc. |
|
Material |
Q195, Q215,Q235,Q345,ST37, A36,45# ,16Mn, SPHC,SGCC,CGCC |
|
Thickness |
Hot Rolled Thickness:2.75mm-100mm |
|
Width |
45mm-2200mm, As Your Request |
|
Length |
1-12m,as Your Request |
|
Technique |
Hot rolled / cold rolled |
|
Surface |
Bare,Black,Oiled,Shot Blasted,Spray Paint,Coated,Galvanized,or as Your Request |
|
Application |
Construction, machinery manufacturing, container manufacturing, shipbuilding, bridges, etc. |
|
Packing |
Standard Export packing(Plastic film in the first layer,second layer is Kraft paper. Third layer is galvanized sheet) |
q550d-carbon-steel-h-beam are commonly used in machine bases, construction, platforms, and frames. Because of its rigidity, low-carbon steel is the most commonly used material for H-bars. These H-bars are less likely to crack from welding than those made of higher-carbon steels, and easier to weld than I-beams because they have a straight flange instead of a radius flange. H-bars are stronger than I-beams, but also heavier.
Hot Tags: q550d carbon steel h beam, China q550d carbon steel h beam manufacturers, suppliers, factory