S235J0 S275JO CARBON STEEL H BEAM
S235J0 S275JO CARBON STEEL H BEAM Products Description
EN 1.0114 steel is a carbon (non-alloy) steel designed for preliminary shaping into wrought products. The properties quoted apply to hot working conditions. 1.0114 is the EN numerical designation for this material. S235J0 is the EN chemical name.
As a non-alloyed mild steel, S275JO is supplied in hot rolled and cold drawn conditions. S275JO steel specification is high yield non-alloy steel. First specified in the European EN10025 standard and later published by the British Standards Institution (BSI). These standards replace BS4360 grades. This material has an average minimum yield strength of 355 N/mm², hence the name S275JO (the "S" indicates that it is a structural steel).
S235JO h shaped steel chemical composition
| C | Mn | P | S | N | Cu | CEV |
| max 0.17 | max 1.4 | max 0.035 | max 0.035 | max 0.012 | max 0.55 | max 0.38 |
S275JO steel h beam chemical composition
| C | Mn | P | S | N | Cu | CEV |
| max 0.18 | max 1.5 | max 0.035 | max 0.035 | max 0.012 | max 0.55 | max 0.42 |
S235JO h beam chemical property
| Nominal thickness (mm): | to 3 | 3 - 100 | 100 - 150 | 150 - 250 |
| Rm - Tensile strength (MPa) Flat and long products | 360-510 | 360-510 | 350-500 | 340-490 |
| Nominal thickness (mm): | to 16 | 16 - 40 | 40 - 63 | 63 - 80 | 80 - 100 | 100 - 150 | 150 - 200 | 200 - 250 |
| ReH - Minimum yield strength (MPa) Flat and long products | 235 | 225 | 215 | 215 | 215 | 195 | 185 | 175 |
| KV - Impact energy (J) longitud., | -20° 27 |
0° 27 |
+20° 27 |
| Nominal thickness (mm): | to 1 | 1 - 1.5 | 1.5 - 2 | 2 - 2.5 | 2.5 - 3 |
| A - Min. elongation Lo = 80 mm (%) parallel, | 17 | 18 | 19 | 20 | 21 |
| Nominal thickness (mm): | 3 - 40 | 40 - 63 | 63 - 100 | 100 - 150 | 150 - 250 |
| A - Min. elongation Lo = 5,65 √ So (%) parallel, | 26 | 25 | 24 | 22 | 21 |
S275JO h profile steel mechanical property
| Nominal thickness (mm): | to 3 | 3 - 100 | 100 - 150 | 150 - 250 |
| Rm - Tensile strength (MPa) Flat and long products | 430-580 | 410-560 | 400-540 | 380-540 |
| Nominal thickness (mm): | to 16 | 16 - 40 | 40 - 63 | 63 - 80 | 80 - 100 | 100 - 150 | 150 - 200 | 200 - 250 |
| ReH - Minimum yield strength (MPa) Flat and long products | 275 | 265 | 255 | 245 | 235 | 225 | 215 | 205 |
| KV - Impact energy (J) longitud., | -20° 27 |
0° 27 |
+20° 27 |
| Nominal thickness (mm): | to 1 | 1 - 1.5 | 1.5 - 2 | 2 - 2.5 | 2.5 - 3 |
| A - Min. elongation Lo = 80 mm (%) parallel, | 15 | 16 | 17 | 18 | 19 |
| Nominal thickness (mm): | 3 - 40 | 40 - 63 | 63 - 100 | 100 - 150 | 150 - 250 |
| A - Min. elongation Lo = 5,65 √ So (%) parallel, | 23 | 22 | 21 | 19 | 18 |
h section steel image
The quality of carbon steel is distinguished by the amount of sulfur (s) and phosphorus (P) in the steel. When the H steel beam sulfur content in carbon steel is not more than 0.050% and the phosphorus content is not more than 0.045%, it is ordinary carbon steel; when the sulfur content and phosphorus content in carbon steel are less than 0.040%, it is high-quality carbon steel; when s235j0-carbon-steel-h-beam sulfur content in carbon steel is less than 0.030% and the phosphorus content is less than 0.035%, it is high-quality carbon steel.
about GNEE group
GNEE (Tianjin) Multinational Trade Co., Ltd. is mainly engaged in the import and export of steel products and the deep processing of steel products. Founded in 2008, it currently has more than 200 employees. Mainly engaged in square tubes, channel steel, angle steel, I-beam, H-shaped steel, seamless steel pipes, open plates, flower formwork, welded pipes, galvanized steel, round steel, flat steel, PPGI, hot-rolled, etc. Our products have been exported to more than 120 countries in Europe, the Middle East, Southeast Asia, Australia, etc. We have won the recognition of our customers with our good reputation and good service. We sincerely welcome friends from all over the world to visit our company and cooperate with us on the basis of long-term mutual benefit. We look forward to receiving your inquiry as soon as possible:
When GNEE customers visited the company, the salesperson warmly received them and took photos. We look forward to more cooperation from new and old customers, and also warmly welcome your visit:
GNEE company has passed SGS CE ISO and other certifications, has complete testing equipment, strong technical force, and accepts factory testing. We firmly believe that "quality is the core of a company's sustainable strength". We will establish stable, long-term, win-win cooperative relationships with our customers and stick to them:
We can customize S235J0 S275JO CARBON STEEL H BEAM and other products of different sizes and standards according to your needs, and provide customers with high-quality after-sales services. If you have any purchasing needs for steel products, please contact us!
Hot Tags: S235J0 S275JO CARBON STEEL H BEAM, China S235J0 S275JO CARBON STEEL H BEAM manufacturers, suppliers, factory, application specific h profile, h section, moulding h profile, zinc plated h profile, painted h profile, energy industry h profile