DIN ST37.2 DIN 17100
Low-Alloy High-Strength plate steel Product Introduction
The general structural steels covered by DIN St37.2 DIN 17100 are supplied in different conditions ranging from hot-rolled, cold-rolled, normalised and quenched and tempered. Hot-rolled steels usually come in grades St37-2 and St52-3. These steels are primarily used in building structures, pressure vessel components and bridges.
As experienced DIN St37.2 DIN 17100 supplier, we can not only provide clients with quantity guaranteed DIN 17100 high-quality products, but also offer good price and equipped with complete after sales service. Besides, there are also a series of added value service, such as information share with clients, including DIN St37.2 DIN 17100 chemical composition, St37.2 properties, St37.2 density, St37.2 strength, St37.2 equivalent, etc.
Application: Ordinary structural steel.
Heat treated: 1857°C - 1668°C.
Low-Alloy High-Strength plate Product Details
DIN St37.2 DIN 17100 Chemical Element
Carbon, Silicon, Manganese, Phosphorus, Sulfur are the main basic elements in DIN St37.2 DIN 17100.
Carbon is the most important hardening element in steel.
Silicon helps to strengthen the strength. Like manganese, silicon is used to maintain the strength of steel during steel production.
Manganese is the important austenite stabilizing elements contribute to the formation of texture structure and increase the firmness, strength and wear resistance.
Phosphorus is a harmful element. Reducing the plasticity and toughness of steel and appearing cold brittleness. It can significantly increase the strength of steel, and improve the atmospheric corrosion stability. The content should be limited to less than 0.05%.
Usually sulfur is a harmful element, which makes the hot brittleness of steel high, and the content of sulfur is limited to less than 0.05%.
| Element | Min | Max | Similar |
|---|---|---|---|
| N | - | 0.0090 | - |
| P | - | 0.0500 | - |
| S | - | 0.0500 | - |
| C | - | 0.1700 | - |
DIN St37.2 DIN 17100 Mechanical Properties
The yield refers to the transition of DIN St37.2 DIN 17100 from non-uniform elastic state to elastic-plastic state after reaching a certain deformation stress. It marks the beginning of macro-plastic deformation.
Tensile strength(Rm) refers to the maximum stress that DIN St37.2 DIN 17100 bears before breaking. When the steel yields to a certain extent, its resistance to deformation increases again due to the rearrangement of internal grains. At this time, although the deformation develops rapidly, it can only increase with the increase of stress until the maximum stress is reached. Thereafter, the DIN St37.2 DIN 17100 is ability to resist deformation is obviously reduced, and a large plastic deformation occurs at the weakest point, where the section of the specimen shrinks rapidly, leading to necking until fracture. The maximum stress value of DIN St37.2 DIN 17100 before tensile fracture is called strength limit or tensile strength.
| Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 713 (≥) | 484 (≥) | 13 | 14 | 31 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 141 |
DIN St37.2 DIN 17100 Physical Properties
Basic Physical Properties of DIN St37.2 DIN 17100 Steel
| Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson's coefficient, ν |
|---|---|---|---|---|---|---|---|
| 44 | - | - | 0.42 | - | |||
| 322 | 891 | - | 22.3 | 234 | - | ||
| 471 | - | 22 | 11.2 | 443 | 122 |
Low-Alloy High-Strengtht steel plate Product Image

GNEE Group Team Photo
Committed to strict quality control and dedicated customer service, we have an experienced production staff ready to meet your needs and ensure customer satisfaction. We guarantee you a pleasant stay in China.

GNEE Group Exhibition Pictures

GNEE Group customers visit

If you have more needs and questions about DIN ST37.2 DIN 17100 steel, we are happy to advise you!
Hot Tags: din st37.2 din 17100, China din st37.2 din 17100 manufacturers, suppliers, factory, ASTM A709Gr 50W Weathering Steel, Corten A, S355J2G2W steel, Weathering steel, Atmospheric Corrosion Resistant Steel, Corten A Weathering Steel





