Products
EN P 460 ML 1 EN 10028-5
video
EN P 460 ML 1 EN 10028-5

EN P 460 ML 1 EN 10028-5

Pressure flat steel products

EN P 460 ML 1 EN 10028-5

 

Boiler and Pressure Vessel Steel Product Introduction

 

EN P 460 ML 1 EN 10028-5 steel is a stainless steel designed to meet the needs of the European Union's Pressure Equipment Directive (PED) for high temperature applications. The steel is primarily used in the construction of components for pressure vessels, boilers, and other equipment that require a steel that can withstand the extreme temperatures and loads generated in these environments. The steel has good weldability, excellent corrosion resistance, good formability, and exceptional mechanical properties. It is one of the few steels that meets the PED requirements with relatively low cost.

Our company is world class raw iron and steel materials supplier. EN P 460 ML 1 EN 10028-5 is one of our main steel products. Other than fresh production, we also have large EN 10028-5 stocks to meet urgent demands of clients. The EN P 460 ML 1 EN 10028-5 is available in a variety of standard sizes and can also be customized according to customer needs. In addition, we provide processing services, such as: cutting, bending, drilling, welding and other processing services.

Application: Pressure flat steel products - Part 5: Weldable fine grain steel, thermomechanical rolling.

Heat treated: 1379°C - 1286°C.

 

Boiler and Pressure Vessel Steel Product Details

 

EN P 460 ML 1 EN 10028-5 Chemical element

EN P 460 ML 1 EN 10028-5 is an alloy of iron and carbon and other elements. Because of its high tensile strength and low cost, it is a major component used in buildings, infrastructure, tools, ships, automobiles, machines, appliances. The EN P 460 ML 1 EN 10028-5 chemical composition determined by ladle analysis shall comply with the specified values of the following table.

Element Min Max Similar
V - 0.1000 -
Ti - 0.0500 -
Si - 0.6000 -
S - 0.0150 -
P - 0.0200 -
Ni - 0.5000 -
Nb+Ti+V - 0.1500 -
Nb - 0.0500 -
N - 0.0200 -
Mo - 0.2000 -
Mn - 1.7000 -
Cr+Cu+Mo - 0.6000 -
CEV - 0.4500 -
C - 0.1600 -
Al 0.0200 - -

EN P 460 ML 1 EN 10028-5 Mechanical properties

The resistance of EN P 460 ML 1 EN 10028-5 to damage under load is called its mechanical properties. The mechanical properties of steel materials are the main basis for the design and material selection of parts. The mechanical properties of steel materials will be different with different loading properties (such as tension, compression, torsion, impact and cyclic loads). Common mechanical properties include strength, plasticity, hardness, impact toughness, multiple impact resistance and fatigue limit.
The mechanical properties of EN P 460 ML 1 EN 10028-5 is in line with EN 10028-5. The main properties as below:

Yield
Rp0.2 (MPa)
Tensile
Rm (MPa)
Impact
KV/Ku (J)
Elongation
A (%)
Reduction in cross section on fracture
Z (%)
As-Heat-Treated Condition Brinell hardness (HBW)
189 (≥) 893 (≥) 34 12 31 Solution and Aging, Annealing, Ausaging, Q+T,etc 413

EN P 460 ML 1 EN 10028-5 Physical properties

Physical properties of EN P 460 ML 1 EN 10028-5 are mainly indicated by modulus of electrical resistance value, thermal conductivity, specific thermal capacity, coefficient of thermal expansion, elasticity, poisson's ratio, density, etc.

Temperature
(°C)
Modulus of elasticity
(GPa)
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and Thermal conductivity
(W/m·°C)
Specific thermal capacity
(J/kg·°C)
Specific electrical resistivity
(Ω mm²/m)
Density
(kg/dm³)
Poisson's coefficient, ν
13 - -     0.43 -  
567 127 - 14.3 131   -  
885 - 41 44.2     341 132

 

Boiler and Pressure Vessel Steel Product Image

 

wear resistant steel plate

 

GNEE Group Team Photo

 

Committed to strict quality control and dedicated customer service, we have an experienced production staff ready to meet your needs and ensure customer satisfaction. We guarantee you a pleasant stay in China.

 

wear plate steel

 

GNEE Group Exhibition Pictures

 

wear resistant plate

 

GNEE Group customers visit

 

abrasion resistant steel plate

 

If you have more needs and questions about EN P 460 ML 1 EN 10028-5 steel, we are happy to advise you!

 

Hot Tags: en p 460 ml 1 en 10028-5, China en p 460 ml 1 en 10028-5 manufacturers, suppliers, factory, ASTM A537 Heat Treated PVQ Steel, SA285GrC Pressure Vessel Steel Plate, Boiler Quality Steel Plates, steel boiler plate, boiler plate, Pressure vessel

Send Inquiry