A283 Low And Intermediate Tensile Strength Carbon Steel Plates
video
A283 Low And Intermediate Tensile Strength Carbon Steel Plates

A283 Low And Intermediate Tensile Strength Carbon Steel Plates

ASTM A283 carbon steel is a carbon (non-alloy) steel formulated for primary forming into wrought products. It can have a moderately high ductility among the wrought carbon or non-alloy steels in the database.

Products Description

 

ASTM A283 carbon steel is a carbon (non-alloy) steel formulated for primary forming into wrought products. It can have a moderately high ductility among the wrought carbon or non-alloy steels in the database.

 

The properties of ASTM A283 carbon steel include four common variations. This page shows summary ranges across all of them. For more specific values, follow the links immediately below.

A283

The graph bars on the material properties cards further below compare ASTM A283 carbon steel to: wrought carbon or non-alloy steels (top), all iron alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.

 

Products Specification

 

Product Name A283/Q195 Cold Rolled Steel Plate
Production Process Hot Rolling, Cold Rolling
Material Standards AISI, ASTM, ASME, DIN, BS, EN, ISO, JIS, GOST, SAE, etc.
Width 100mm-3000mm
Length 1m-12m, or Customized Size
Thickness 0.1mm-400mm
Delivery Conditions Rolling, Annealing, Quenching, Tempered Or Standard
Surface Process Ordinary, Wire Drawing, Laminated Film

 

Chemical Composition

 

A283 C max. Mn max. P max. S max. Si (Greater1 inch, less than 1/2 inch) Si (Greater1/2 inch) Cu min.
GradeA 0.14 0.90 0.035 0.04 0.40 0.15~0.40 0.20
GradeB 0.17 0.90 0.035 0.04 0.40 0.15~0.40 0.20
GradeC 0.24 0.90 0.035 0.04 0.40 0.15~0.40 0.20
GradeD 0.27 0.90 0.035 0.04 0.40 0.15~0.40 0.20

 

Mechanical Properties

 

A283 Tensile Strength Yield Strength min. Elongation Rate8 Inches Elongation Rate2 Inches
GradeA 45000-60000psi 310-415MPa 24000psi 165MPa 27%min. 30%min.
GradeB 50000-65000psi 345-450MPa 27000psi 185MPa 25%min. 28%min.
GradeC 55000-75000psi 380-515MPa 30000psi 205MPa 22%min. 25%min.
GradeD 60000-80000psi 415-550MPa 33000psi 230MPa 20%min. 23%min.

 

Physical Performance

 

Physical Performance Metric Imperial
Density 7.80g/cc 0.282 lb/in³

 

Products Application

 

ASTM A283 steel plate is a low-carbon structural steel with high strength and good formability. It is easy to process and manufacture, and can be safely welded using various welding methods. The typical chemical composition of A283 steel is C ≤ 0.26%, Mn 0.70–1.20%, P ≤ 0.04%, S ≤ 0.05%, providing a balance of strength, ductility, and weldability.

 

ASTM A283 steel plate is used for low- to medium-tensile strength applications, with a minimum yield strength ranging from 205 to 280 MPa (Grades A–D) and tensile strength between 340–480 MPa, while elongation typically ranges from 20–27% depending on grade and thickness.

 

This steel plate is widely employed in the manufacture of riveted, bolted, and welded structures, including storage tanks, cryogenic control vessels, bridges, and buildings, as well as prefabricated buildings, warehouses, and industrial/commercial structures.

 

Typical thicknesses range from 6 mm to 150 mm, with widths of 1,500–3,000 mm and lengths up to 12,000 mm, customizable according to project requirements.

 

Thanks to its good mechanical properties, weldability, and cost-effectiveness, ASTM A283 steel plate is an economical choice for structural applications requiring reliable performance under moderate loads.

 

Contact now to get A283 Quote

 

product-574-365

 

 

Hot Tags: a283 low and intermediate tensile strength carbon steel plates, China a283 low and intermediate tensile strength carbon steel plates manufacturers, suppliers, factory, JIS High Strength Plate, low alloy high strength structural steel, S355 HSLA Steel Plat, High Strength Hot Rolled Steel Sheet, Low Alloy Steel Plates, high strength low alloy steel

Send Inquiry