Q620 HN CARBON STEEL H BEAM is a kind of Economic section steel, which sectional area distribution is more optimized, the ratio of strength to weight is more reasonable, Mechanical properties of section is more better.It is developed from the I-section steel optimization of a better section mechanical properties of the economic section steel, because its section is same as the English letter "H" ,so be named as H-Beam. Because the various part of H-beam is arranged at right angles, H-beam has the advantages of strong bending resistance, simple construction, cost saving and light structural weight in all directions, so it has been widely used.
Q620 HN CARBON STEEL H BEAM Introduction:
|
Product |
Q620 HN CARBON STEEL H BEAM | |
|
Size |
High(H) |
100mm-900mm |
|
Flange width(B) |
100mm-300mm |
|
|
Web thickness(t1) |
6mm-16mm |
|
|
Flange thickness(t2) |
8mm-28mm |
|
|
Length |
6-12m/pc or as your request |
|
|
Standard |
AISI, ASTM, BS, DIN, GB, JIS etc. |
|
|
Material |
SS400, Q235B,S235JR,Q345B, S355JR , A992, A36 etc. |
|
|
Technique |
Hot rolled & Welded |
|
Q620 HN CARBON STEEL H BEAM is widely used in engineering structures, due to its superior material performance, but corrosion tends to occur in steel structures with time. The corrosion effects on mechanical performance of Q620 HSS were investigated experimentally. The electrochemical accelerated corrosion test was conducted to generate corroded Q620 HSS specimens (ρ= 0~60%). With increases in the corrosion degree, corrosion performance became more and more non-uniform.
Hot Tags: q620 hn carbon steel h beam, China q620 hn carbon steel h beam manufacturers, suppliers, factory, extruded h profile, advanced manufacturing h profile, electronics industry h profile, contemporary h profile, state of the art h profile, direct from manufacturer h profile