Products
Q345 S235 H Section Beam
video
Q345 S235 H Section Beam

Q345 S235 H Section Beam

Q345 Steel is a type of low-alloy steel, that is used in the manufacturing of bridges, buildings, and other structures. It has a yield strength of 345 MPa and tensile strength of 470-660 MPa. S235 grade steel is a readily weldable low carbon manganese steel with good impact resistance (including in sub-zero temperatures). This material is commonly supplied in the untreated or normalised condition and is available in several variations (denoted by additional letters and/or digits), which offer slight modifications of chemical composition and mechanical properties.

 

 
Products Description

 

Q345 - good comprehensive mechanical properties, low temperature performance, good plasticity and weldability. It can be used as medium and low pressure vessels, oil tanks, vehicles, cranes, mining machinery, power stations, bridges and other structures bearing dynamic loads, mechanical parts, building structures and general metal structures. It can be used under – 40 ℃ in hot rolling or normalizing state Cold regions Various structures.

Mechanical properties of Q345B

Yield strength: ≤ 16mm: greater than 345, 16-40mm: greater than 335, 40-63mm: greater than 325, 63-80mm: greater than 315.

80-100m: more than 305100-150 mm: greater than 285150-200 mm: greater than 275.

Tensile strength: 450-630.

Elongation: more than 17.

Impact test: test temperature: 20 ℃: more than 34.

 

EU

US

S235

A283C

 

EU Grade

C%

Mn%

P%

S%

Si%

S235

0.22 max

1.60 max

0.05 max

0.05 max

0.05 max

 

H-Beams Cost Less Than I-Beams For The Same Amount of Structural Support.

H beams and I beams are two different types of structural steel members that are commonly used in construction. The distinguishing feature between them is their shape. An H beam is shaped like the letter "H" with one vertical flange and two long-side flanges, whereas an I beam has a cross-section that resembles the letter "I" with a single vertical web or web thickest at mid-span, two webs, and no bottom flange.

These steel members have similar mechanical properties but differ in dimensional characteristics.

H-beams are more efficient than I-beams because they are better at carrying bending and shear loads. H-beams have a thicker, deeper web, which means that they can better support the weight of an object placed on top of them. This also helps balance out any cantilevered loads that might be placed on an H-beam in the future (such as additional floors or beams). In addition to having greater section modulus – which means that they are able to resist compression forces better than I-beams do – they also have greater tensile strength values, meaning that they're less likely to bend under pressure from tension forces acting upon them.

To short, the main difference between an H-beam and an I-beam is that the web of an H-beam is much thicker than that of an I-beam. A thicker web means a stronger beam, which allows for more load-bearing capacity. This means that for the same amount of structural support, you can use fewer H beams than I beams.

Another difference between these two types of beams is that instead of being straight up and down like in the case with most other types of beams (such as T or L), H beams are curved outwards at both ends to create flanges and webs that run parallel to each other along their length. This structure makes them particularly suited for carrying bending loads-that means they're great if you need one piece of wood or metal to bend slightly while staying stiff but flexible throughout its length-and also helps them carry shear loads more efficiently than any other type because they distribute stress evenly over their entire length rather than concentrating it at one end where it could snap off easily due to fatigue failure).

 

 

166

 

 

 
Product Details

 

Product Name Q345 S235 h section beam
Length As your required
Standard ASTM/ GB/ JIS/ EN ect.
Delivery Time According to your quantity
Payment Terms FOB/ CIF/ EXW/ DDP
Origin China
Sample Yes
Tolerance ±0.3
Packing Packed with steel belts tightly, in bundle

 

 

 
customer visit

 

 

138

 

The group adheres to the tenet of "intentional management, customer first, coordinated development and dedication to society" and abides by the business philosophy of "technology first, quality as priority, striving for excellence, integrity for future", which continuously satisfy different needs of customer around the world in the steel supply chain area.

 

Professional sales team, providing customers with first-class services;

strict purchasing and quality inspection team, carefully selecting high-quality raw materials;

advanced scientific and technical team to improve production and reduce costs for customers;

intimate shipping logistics team protecting product transportation;

excellent design and processing team, carefully crafted and refined.

Hot Tags: q345 s235 h section beam, China q345 s235 h section beam manufacturers, suppliers, factory, metal h profile, custom h profile, anodized h profile, curved h profile, trendy h profile, functional part h profile

Send Inquiry