Q275 HW CARBON STEEL H PROFILE has good plasticity, toughness and weldability, as well as a certain strength, good cold bending performance. Q235 material is usually rolled into wire rod or round steel, square steel, flat steel, angle steel, I beam, channel steel, other sections and steel plates. These products are widely used in construction and engineering welded structures, to make steel bars or build factory buildings, high voltage transmission towers, bridges, vehicles, boilers, containers, etc.,
Q275 HW CARBON STEEL H PROFILE Introduction:
| Main chemical elements composition of Q275D | ||||
| C | Si | Mn | P | S |
| 0.20 | 0.35 | 1.50 | 0.035 | 0.035 |
Q275 HW CARBON STEEL H PROFILE Mechanical Property
| Thickness (mm) | ||||||
| Q275D | ≤ 16 | > 16 ≤ 40 | > 40 ≤ 60 | > 60 ≤ 100 | > 100 ≤ 150 | > 150 |
| Yield strength (≥Mpa) | 275 | 265 | 255 | 245 | 225 | 215 |
| Tensile strength (Mpa) | 410-540 | |||||
Q275 HW CARBON STEEL H PROFILE is a Chinese carbon structural steel, “Q” is the first letter of Chinese spelling of “qu fu dian”, the translation is “Yield Point” or “Yield Strength”, “275” is short for the unit value “275 MPa”, and the tensile strength is 410-540 MPa (N/mm2), all data are tested with 16mm diameter steel bars or 16mm thickness steel plates.
Hot Tags: q275 hw carbon steel h profile, China q275 hw carbon steel h profile manufacturers, suppliers, factory, architectural h profile, h beam, construction industry h profile, classic h profile, healthcare industry h profile, straight h profile