Q195 CARBON STEEL H PROFILE is a carbon structural steel. The yield strength is 195MPA. Lower strength than Q235. The price is cheaper. Used in construction, structure, motorcycle frame, etc. The American ASTM brand is Gr. B (σs185). σs185 is the yield strength of 185MPa.
The Q in Q195 represents the code for the yield point (limit) of ordinary carbon structural steel, and 195 represents the value of its yield point (limit), unit: MPa (N/mm²).
Q195 has high plasticity, toughness, and welding performance, good pressure processing performance, but low strength.
Q195 Q345 CARBON STEEL H PROFILE Introduction:
| Material Chemical Composition (%) |
Q195 | C | Mn | Si | S | P | |
| 0.06-0.12 | 0.25-0.50 | ≤0.30 | ≤0.050 | ≤0.045 | |||
| Tensile strength: 315-430(Mpa) | |||||||
| Yield strength:195(Mpa) | |||||||
| Elongation:33 | |||||||
| Q235 | C | Mn | Si | S | P | ||
| 0.12-2.0 | 0.3-0.70 | ≤0.30 | ≤0.045 | ≤0.045 | |||
| Tensile strength: 375-460(Mpa) | |||||||
| Yield strength:235(Mpa) | |||||||
| Elongation:26 | |||||||
| Q345 | C | Mn | Si | S | P | V | |
| ≤0.20 | ≤1.70 | ≤0.55 | ≤0.040 | ≤0.040 | 0.02-0.15 | ||
| Tensile strength: 470-630(Mpa) | |||||||
| Yield strength:345(Mpa) | |||||||
| Elongation:21 | |||||||
Q345 CARBON STEEL H PROFILE is commonly rolled into wire rod or round steel, square steel, flat steel, angle steel, I beam, channel steel, other sections and steel plates. These products are widely used in construction and engineering welded structures, to make steel bars or build factory buildings, high voltage transmission towers, bridges, vehicles, boilers, containers, etc.,
Hot Tags: q195 q345 carbon steel h profile, China q195 q345 carbon steel h profile manufacturers, suppliers, factory