CARBON STEEL H BEAM Q690 HW make up the most common component of structural framing systems. They can be used to build bridges, warehouses and other large buildings, and can even be used in machinery or to frame truck beds. Beams can be positioned on their sides or at an angle and connect to columns via bolts, welds, and beam supports.
CARBON STEEL H BEAM Q690 HW Introduction:
|
SPECIFICATIONS FOR H BEAM |
||
|
INTRODUCTION |
Product |
CARBON STEEL H BEAM Q690 HW |
|
Standard |
ASTM,BS,GB,JIS,etc |
|
|
Grade |
SS400, ST37-2, A36, S235JRG1, Q235, Q345 etc |
|
|
SPECIFICATIONS |
Product Keywords |
h beam for building |
|
manufacturing technique |
Hot rolled(elementary) Can be processed again repeatedly |
|
|
strength of extension |
A36/420MPa S355JR/485MPa |
|
|
Shipping |
Technique |
Hot Rolled |
|
Delivery Time |
10~20days |
|
|
Shipping |
1)Shipping by containers |
|
This paper details an investigation into the effect of martensite–austenite (M–A) constituent on impact toughness of intercritical heat-affected zone (IC HAZ) in CARBON STEEL H BEAM Q690 HW, a low carbon bainitic steel. Large samples with uniform microstructure similar to that of the actual IC HAZ were achieved through combinations of heat treatments. The samples were heated to temperature between 750 and 830 °C for 30 min and then quenched in water.
Hot Tags: carbon steel h beam q690 hw, China carbon steel h beam q690 hw manufacturers, suppliers, factory, adjustable h profile, cold rolled h profile, weldable h profile, door h profile, matte finish h profile, roof framing h profile