16mndr-carbon-steel-h-beam is a pressure vessel special plate with yield strength of 340MPa grade, it has good comprehensive mechanical properties and process performance. Phosphorus, sulfur content than ordinary 16Mn steel, in addition to tensile strength, elongation requirements than ordinary 16Mn steel has been improved, but also required to ensure impact toughness, was China's most widely used, the largest amount of pressure vessel special steel.
16mndr-carbon-steel-h-beam Product Description
| Product Name | 16mndr-carbon-steel-h-beam |
| Length | 4m-12m or as required |
| Width | 0.6m-3m or as required |
| Thickness | 0.1mm-300mm or as required |
| Standard | AISI,ASTM,DIN,JIS,GB,JIS,SUS,EN,etc. |
| Technique | Hot rolled |
| Surface Treatment | Clean, blasting and painting according to customer requirement |
| Thickness tolerance | ±0.1mm |
| Application | It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts. |
| MOQ | 1tons.We also can accept sample order. |
| Shipment time | Within 15-20 workdays after receiving deposit or L/C |
16mndr-carbon-steel-h-beam are commonly used in machine bases, construction, platforms, and frames. Because of its rigidity, low-carbon steel is the most commonly used material for H-bars. These H-bars are less likely to crack from welding than those made of higher-carbon steels, and easier to weld than I-beams because they have a straight flange instead of a radius flange. H-bars are stronger than I-beams, but also heavier.
Hot Tags: 16mndr carbon steel h beam, China 16mndr carbon steel h beam manufacturers, suppliers, factory, industrial h profile, uniform h profile, aerospace industry h profile, equipment part h profile, thick h profile, offshore h profile