S355 JO HW CARBON STEEL H BEAM is the structural steel of choice for most construction applications. The unique structural build and design of the I beam makes it capable of handling a variety of loads. The I beam consists of two horizontal planes, known as flanges, connected by one vertical section, or the web. The shape of the flanges and the web create an “I” or “H” cross-section. I beams are usually made from structural steel, but some are made from aluminium. The I beam size, weight, section depth, flange width, web thickness and other specifications differ depending on different purposes.
S355 JO HW CARBON STEEL H BEAM Introduction:
| Product Name | H Beam I Beam |
| Grade | Q235B/Q355B/C/D/E/S355J0/S355J2/S355JR |
| Standard | AISI, ASTM, BS, DIN, GB, JIS, EN,etc |
| Flange Thickness | 3mm~200mm |
| Flange Width | 100-1000mm |
| Web Thickness | 4.5-70mm |
| Web Width | 100-450mm |
| Length | 6m-12m or as your requirement |
| Surface | Perforated/galvanized/black |
| Technique | Hot-rolled |
| Packing | Standard seaworthy packing |
| Delivery Time | 15 working days |
When S355 JO HW CARBON STEEL H BEAM is loaded in tension it follows the stress-strain relationship shown in Figure 1. Initially, the steel stretches in a reversible elastic fashion and carries the load without permanent deformation or damage. This is the state that all structural steelwork should remain in throughout its working life. If, however, the stress reaches the yield strength of the steel (fy in Figure 1), plastic deformation will begin to occur as the steel stretches with no corresponding increase in load (the horizontal portion of Figure 1). Importantly, the load is maintained in this condition.
Hot Tags: s355 jo hw carbon steel h beam, China s355 jo hw carbon steel h beam manufacturers, suppliers, factory