Products
S235 S235JR Carbon Steel Beam
video
S235 S235JR Carbon Steel Beam

S235 S235JR Carbon Steel Beam

S235 grade steel is a readily weldable low carbon manganese steel with good impact resistance (including in sub-zero temperatures). This material is commonly supplied in the untreated or normalised condition and is available in several variations (denoted by additional letters and/or digits), which offer slight modifications of chemical composition and mechanical properties. Machinability of this material is similar to that of mild steel.

 

 
Products Description

 

S235JR
A structural grade (S) with at minimum yield strength of 235 N/mm²m, the JR designation confirms that the steel has undergone longitudinal Chary V-Notch impact testing at 27J (Joules) at room temperature.

 

Chemical Composition of S235

GRADE C MN P S N CU
S235 0.17/0.20 1.40 0.040 0.040 0.012 0.55

 

Yield Strength

Yield Strength measures the minimum force needed to create a permanent deformation on the material's surface. Unless the steel meets the minimum yield strength indicated by the European Standard EN10025, it can't be classified as S235 steel.

Structural Steel at 16mm ksi N/mm² (MPa)
S235 33000 ksi 235 N/mm²

 

H beams and I beams are two different types of structural steel members that are commonly used in construction. The distinguishing feature between them is their shape. An H beam is shaped like the letter "H" with one vertical flange and two long-side flanges, whereas an I beam has a cross-section that resembles the letter "I" with a single vertical web or web thickest at mid-span, two webs, and no bottom flange.

These steel members have similar mechanical properties but differ in dimensional characteristics.

H-beams are more efficient than I-beams because they are better at carrying bending and shear loads. H-beams have a thicker, deeper web, which means that they can better support the weight of an object placed on top of them. This also helps balance out any cantilevered loads that might be placed on an H-beam in the future (such as additional floors or beams). In addition to having greater section modulus – which means that they are able to resist compression forces better than I-beams do – they also have greater tensile strength values, meaning that they're less likely to bend under pressure from tension forces acting upon them.

To short, the main difference between an H-beam and an I-beam is that the web of an H-beam is much thicker than that of an I-beam. A thicker web means a stronger beam, which allows for more load-bearing capacity. This means that for the same amount of structural support, you can use fewer H beams than I beams.

 

397

 
Product Details

 

Product Name S235 S235JR carbon steel beam
Length As your required
Standard ASTM/ GB/ JIS/ EN ect.
Delivery Time According to your quantity
Payment Terms FOB/ CIF/ EXW/ DDP
Origin China
Sample Yes
Tolerance ±0.3
Packing Packed with steel belts tightly, in bundle

 

 

 
customer visit

 

155

 

Our factory has complete production facilities, and provides laser cutting , bending, welding, painting, assembly and other processing services.

We have own large-scale indoor warehouse with perennial spot stocks totally above 5000 tons mainly include 2000 tons galvanized

steel series and 2500 tons carbon steel series

All the products have to pass the inspections such as tension test, hardness test, spectrophotometer test, salt spray test and PH

test before leaving the factory .

 

Our Service

1.Quality Assurance ''Knowing our supplier''

2.On time delivery ''No waiting around''

3.One stop shopping ''Everything you need in one place''

4.Cost saving options ''Getting you need in one place ''

5.Small quantity acceptable ''Every ton is valuable to us''

Hot Tags: s235 s235jr carbon steel beam, China s235 s235jr carbon steel beam manufacturers, suppliers, factory, uniform h profile, fence building h profile, pole h profile, curved h profile, customized service h profile, window fitting h profile

Send Inquiry