CARBON STEEL H BEAM S355 J2 HM is a medium tensile, low carbon manganese steel which is readily weldable and possess good impact resistance (also in sub-zero temperatures). This material is commonly supplied in the untreated or normalized condition.
Machinability of this material is similar to that of mild steel.
Chemical Composition of CARBON STEEL H BEAM S355 J2 HM
| Element Name |
C |
Mn |
Si |
P |
S |
N |
Cu |
CEV |
|
S355jr |
0.24 |
1.06 |
0.55 |
0.04 |
0.04 |
0.012 |
0.55 |
0.45-0.47 |
|
S355j0Content(max %) |
0.2-0.22 |
1.60 |
0.55 |
0.035 |
0.035 |
0.012 |
0.55 |
0.45-0.47 |
|
S355j2Content(max %) |
0.20-0.22 |
1.60 |
0.55 |
0.030 |
0.030 |
- |
0.55 |
0.45-0.47 |
Physical properties of CARBON STEEL H BEAM S355 J2 HM
| Thickness(mm) |
To 3 |
3-100 |
100-150 |
150-250 |
|
S355jr |
510-680 |
470-630 |
450-600 |
450-600 |
|
S355j0 |
510-680 |
470-630 |
450-600 |
450-600 |
|
S355j2 |
510-680 |
470-630 |
450-600 |
450-600 |
EN10210 is a hot finished structural hollow section that you can depend on even in the most arduous conditions. Hot finishing means that 355 Hollow Section is stress-relieved, has tighter corner radius and consistent dimensions. This gives you the peace of mind that 355 Hollow Section will perform where failure is simply not an option and where consistency is critical in addition to the assurance of batch-testing, full test certification and comprare cialis online italiatraceability of the steel give you confidence that you are using a quality product.
Hot Tags: carbon steel h beam s355 j2 hm, China carbon steel h beam s355 j2 hm manufacturers, suppliers, factory, customized service h profile, narrow h profile, high strength h profile, annealed h profile, special purpose h profile, wholesale h profile