A709 GR.50 HW CARBON STEEL H BEAM is a high-strength low alloy (HSLA) steel that demonstrates atmospheric corrosion resistance better than many steels with a corrosion index of 6.0 and higher, while providing a minimum tensile strength of 70 ksi. As a result, A709's superb mechanical properties offer critical support to pedestrian bridges, railroad bridges, overpasses, highway bridge girders, and other bridge components.
A709 GR.50 HW CARBON STEEL H BEAM Introduction:
| Product name | A709 GR.50 HW CARBON STEEL H BEAM |
| Standard | ASTM |
| Certification | ISO, BV, TUV, SGS |
| Size | Flange Thickness: 4.5 – 70mmor or as your request Web Thickness: 5 – 30mm or as your request Flange Width: 100mm – 1000mm Web Width: 88mm – 1056mm or as your request |
| Materials | A36, A588, A709, A992, A529, AH32, AH36, DH32, DH36, SS400 – SS540 Series , 300 Series, SS400, ST37 – 2, ST52, S235JR, S275JR, S355JR, S235, 5275, S355, S460 |
| Specifications | W8, W10, W12, W14, W16, W18, W21, W24, W27, W30, W33, W36, HP8, HP10, HP12, HP14, HP16; IPEAA80, IPEA80, IPE80, IPEAA10, IPEA100, IPE100, IPEAA120, IPEA120, IPE120, IPEAA140, IPEA140, IPE140, IPEAA160, IPEA160, IPE160, IPEAA180, IPEA180, IPE180, IPEO180+, IPEAA200, IPEA200, IPE200, IPEO200+, IPEAA220, IPEA220, IPE220, IPEO220+, IPEAA240, IPEA240, IPE240, IPE0240+, IPEA270; |
| Tolerance standard | EN100341993 ASTM A6/A6M-12(HL.HD360-400) |
| Processing Service | Cutting, Punching, Polishing or as customer's request |
| Surface Services | Galvanized, coated or as your request |
| Technique | Hot rolled, cold bent, cold rolled, cold drawn, extruded, hot bent, welded and special rolled |
| MOQ | 1 Ton |
| Capacity | 10, 000 ton per month |
| Payment | T / T, L / C, etc |
| Trade Term | FOB, CIF, CFR, EXW, etc. |
1) Manganese minimum 0.80% for plates over 3/8 inches in thickness; a minimum of 0.50% for plates 3/8 inches and less in thickness. The manganese to carbon ratio shall not be less than 2 to 1. For each reduction of 0.01% below the specified carbon maximum, an increase of 0.06% manganese above the specified maximum is permitted up to a maximum of 1.60%.
2) For plates greater than 1.50 inches in thickness, silcon range shall be 0.15% to 0.40.
3) Copper when specfied shall have a minimum content of 0.20%.
Hot Tags: a709 gr.50 hw carbon steel h beam, China a709 gr.50 hw carbon steel h beam manufacturers, suppliers, factory, Stainless Steel Angle 304, Stainless steel angle steel, 304 Stainless Steel Angle Iron, Stainless Steel L Angle, Stainless Steel Unequal Angle