JIS SMA 58 W JIS G3114 abrasion resistant steel
wear plate steel Product Introduction
JIS SMA 58 W JIS G3114 has a wide range of steel grades and is one of the most widely used steels for structural applications. It contains single, fine-grained and low-alloy steels and is commonly used in buildings and bridges, because of its strong and reliable performance.
JIS SMA 58 W JIS G3114 Material, SMA 58 W steel,SMA 58 W steel hardness, SMA 58 W plate weight, SMA 58 W plate size, SMA 58 W plate thickness, JIS G3114 Germany DIN equivalent, JIS G3114 steel manufacturer in China, JIS SMA 58 W JIS G3114 steel mechanical properties, JIS SMA 58 W JIS G3114 steel in Malaysia, JIS SMA 58 W JIS G3114 steel in Dubai
Application: Hot rolled atmospheric corrosion resistant welded structural steel.
Heat treated: 1666°C - 1634°C.
wear resistant plate Product Details
JIS SMA 58 W JIS G3114 Chemical Element
Carbon, Silicon, Manganese, Phosphorus, Sulfur are the main basic elements in JIS SMA 58 W JIS G3114.
Carbon is the most important hardening element in steel.
Silicon helps to strengthen the strength. Like manganese, silicon is used to maintain the strength of steel during steel production.
Manganese is the important austenite stabilizing elements contribute to the formation of texture structure and increase the firmness, strength and wear resistance.
Phosphorus is a harmful element. Reducing the plasticity and toughness of steel and appearing cold brittleness. It can significantly increase the strength of steel, and improve the atmospheric corrosion stability. The content should be limited to less than 0.05%.
Usually sulfur is a harmful element, which makes the hot brittleness of steel high, and the content of sulfur is limited to less than 0.05%.
| Element | Min | Max | Similar |
|---|---|---|---|
| Si | 0.1500 | 0.6500 | - |
| S | - | 0.0350 | - |
| P | - | 0.0350 | - |
| Ni | 0.0500 | 0.3000 | - |
| Mn | - | 1.4000 | - |
| Cu | 0.3000 | 0.5000 | - |
| Cr | 0.4500 | 0.7500 | - |
| C | - | 0.1800 | - |
JIS SMA 58 W JIS G3114 Mechanical Properties
Carbon manganese steels offer a minimum yield strength of 245 MPa and a minimum tensile strength of 325 MPa with a 22% elongation rate. Carbon-manganese-silicon steels offer a minimum yield strength of 235 MPa and a minimum tensile strength of 315 MPa with a 22% elongation rate.
What is the chemical composition of JIS SMA 58 W JIS G3114 steel? For JIS SMA 58 W JIS G3114 Hardness, JIS SMA 58 W JIS G3114 steel tensile strength, yield strength,elongation, please see the following table.
| Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 631 (≥) | 193 (≥) | 34 | 33 | 13 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 332 |
JIS SMA 58 W JIS G3114 Physical Properties
Physical properties of JIS SMA 58 W JIS G3114 are mainly indicated by modulus of electrical resistance value, thermal conductivity, specific thermal capacity, coefficient of thermal expansion, elasticity, poisson's ratio, density, etc.
| Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson's coefficient, ν |
|---|---|---|---|---|---|---|---|
| 33 | - | - | 0.12 | - | |||
| 558 | 119 | - | 32.3 | 324 | - | ||
| 577 | - | 21 | 31.2 | 112 | 112 |
abrasion resistant steel plate Product Image

GNEE Group Team Photo
Committed to strict quality control and dedicated customer service, we have an experienced production staff ready to meet your needs and ensure customer satisfaction. We guarantee you a pleasant stay in China.

GNEE Group Exhibition Pictures

GNEE Group customers visit

If you have more needs and questions about JIS SMA 58 W JIS G3114 abrasion resistant steel, we are happy to advise you!
Hot Tags: jis sma 58 w jis g3114, China jis sma 58 w jis g3114 manufacturers, suppliers, factory, Corten steel, A588 weathering steel, Corten Steel Beams, weathering steel sheet, ASTM A606 COR TEN Weathering Steel, corten material





