GB Q500NH GB/T 4171 resistant steel
wear plate steel Product Introduction
Q500NH grade, What's the Chemical Composition of GB Q500NH GB/T 4171? Chemical Composition of Q500NH Steel, Q500NH steel properties, Q500NH carbon Steel, GB/T 4171 steel plate Supplier in Japan, GB/T 4171 steel sheet Exporter, GB/T 4171 steel Price, GB/T 4171 Equivalent steel, GB/T 4171 steel supplier in China, GB/T 4171 steel Chinese equivalent grade, GB Q500NH GB/T 4171 steel Specifications
Application: High weathering structural steel.
Heat treated: 1873°C - 1956°C.
wear resistant plate Product Details
GB Q500NH GB/T 4171 Chemical Element
GB Q500NH GB/T 4171 is hot selling products of our company. Our GB Q500NH GB/T 4171 chemical composition is controlled strictly with stipulation of standard GB/T 4171.
Meanwhile, our advanced GB Q500NH GB/T 4171 production line strives to control impurities to the minimum, so as to make GB Q500NH GB/T 4171 play its best performance. Below is the proportion of main elements in GB Q500NH GB/T 4171:
| Element | Min | Max | Similar |
|---|---|---|---|
| Zr | - | 0.1500 | - |
| V | 0.0200 | 0.1200 | - |
| Ti | 0.0200 | 0.1000 | - |
| Si | - | 0.6500 | - |
| S | - | 0.0300 | - |
| P | - | 0.0250 | - |
| Ni | 0.1200 | 0.6500 | - |
| Nb | 0.0150 | 0.0600 | - |
| Mo | - | 0.3000 | - |
| Mn | - | 2.0000 | - |
| Cu | 0.2000 | 0.5500 | - |
| Cr | 0.3000 | 1.2500 | - |
| C | - | 0.1600 | - |
| Al | 0.0200 | - | - |
GB Q500NH GB/T 4171 Mechanical Properties
The tensile strength of GB Q500NH GB/T 4171 steel is between 570 and 700MPa. The yield strength of this steel is min 195MPa and the elongation after fracture is approximately 12%. The test value of lateral expansion of steel goes up to 22%. The notch impact energy of GB/T 4171 steel plates can reach 34J. The cold bending performance of the steel plates is satisfactory, with the bend radius greater than 4 times the width of the steel plates.
The GB Q500NH GB/T 4171 material mechanical properties shall comply with the values given in the following table.
| Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 698 (≥) | 187 (≥) | 41 | 24 | 13 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 322 |
GB Q500NH GB/T 4171 Physical Properties
Basic Physical Properties of GB Q500NH GB/T 4171 Steel
| Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson's coefficient, ν |
|---|---|---|---|---|---|---|---|
| 12 | - | - | 0.23 | - | |||
| 613 | 459 | - | 41.3 | 311 | - | ||
| 113 | - | 22 | 32.2 | 131 | 131 |
abrasion resistant steel plate Product Image

GNEE Group Team Photo
Committed to strict quality control and dedicated customer service, we have an experienced production staff ready to meet your needs and ensure customer satisfaction. We guarantee you a pleasant stay in China.

GNEE Group Exhibition Pictures

GNEE Group customers visit

If you have more needs and questions about GB Q500NH GB/T 4171 resistant steel, we are happy to advise you!
Hot Tags: gb q500nh gb/t 4171, China gb q500nh gb/t 4171 manufacturers, suppliers, factory, A606 4 Corten Steel Sheet, ASTM A588 steel, Cowden steel, corten material, Cor Ten weathering steel, low-alloy structural steel





