Mild steel S235JR VS S235J2 steel
steel Product Introduction
S235: Structural Steel with specified minimum yield strength 235MPa
JR: Impact test under 20 ℃
J0: Impact test under 0℃
J2: Low temperature impact test under-20℃
W: Weather resistant
C: Suitable for cold flanging
+N: Normalised
+AR: As Rolled(No special requirement)
+M: Thermo-mechanically rolled(A rolling process in which the properties of the material are obtained by final deformation treatment in a temperature range.)
G1: Rimming Steel
G2: Rimming Steel not permitted
G3: Normalised or Normalised Rolled
G4: Manufactures Discretion
EN10025-2 S235J0
| Chemical composition % MAX | |||||||
| THICKNESS(MM) | C | Mn | Si | P | S | N | Cu |
| ≦40 | 0.17 | 1.4 | ~ | 0.03 | 0.03 | 0.012 | 0.55 |
| >40 | 0.17 | ||||||
| Mechanical properties MIN | |||||||
| Yield Strength MPa | Tensile Strength MPa | Elongation in 2 in. % | |||||
| ≦16 | 235 | 360-510 | 17 | ||||
| >16, ≦100 | 225 | ||||||
| >100 | 175 | 340-500 | |||||
EN10025-2 S235JR
| Chemical composition % MAX | |||||||
| THICKNESS(MM) | C | Mn | Si | P | S | N | Cu |
| ≦40 | 0.17 | 1.4 | ~ | 0.035 | 0.035 | 0.012 | 0.55 |
| >40 | 0.20 | ||||||
| Mechanical properties MIN | |||||||
| Yield Strength MPa | Tensile Strength MPa | Elongation in 2 in. % | |||||
| ≦16 | 235 | 360-510 | 17 | ||||
| >16, ≦100 | 215 | ||||||
| >100 | 175 | 340-500 | |||||
steel plate Product Image

GNEE Group Team Photo
Committed to strict quality control and dedicated customer service, we have an experienced production staff ready to meet your needs and ensure customer satisfaction. We guarantee you a pleasant stay in China.

GNEE Group Exhibition Pictures

GNEE Group customers visit

If you have more needs and questions about steel, we are happy to advise you!
Hot Tags: s235 steel plate, China s235 steel plate manufacturers, suppliers, factory





